your current location：首页 > news>AE basic tutorial (suitable for those who have not yet started) [AE2] Application Energy 2 (Applied Energistics 2) Minec

AE basic tutorial (suitable for those who have not yet started) [AE2] Application Energy 2 (Applied Energistics 2) Minec

2024-12-04 23:26:40|Myriagame |source：minecraft skins

This tutorial is set by the author's setting without permission.

This tutorial will use industry as a case for basic teaching. There is no picture. If you can't remember it, you can open the MC while watching the operation. This tutorial can solve the automation of most machines. The reason is the same.For operation, you can do it, and you will be proficient when you do it. High -level operations will be easier to get started after you read this tutorial and operate it again.Understanding of various items).

Starting preparation:

The least one is charged with the Setz quartz crystal. The more the ordinary Setz quartz crystals, the more quartz the lower quartz, the better.Prepare some others, such as rough stones).

The first stage: super basic machine preparation

1. Make a charger (with wooden crank), which is the role of generally charging the ordinary Setz quartz crystal energy as the energy -powered Setz quartz.

2. Faru Iks Crystal is a charging Setz quartz crystal, a lower Jeonjie, and a redstone in the water.According to the ratio, more will return. If there are many Setz quartz crystals, you can first do a set of Farulux Crystal).

3. A quartz mill and a wooden crank (if there are other automatic powder machine, you can not create this, it is very difficult to make this).Roycis Crystal) grinds into the corresponding powder. The powder can be disorderly synthesized with sand to the corresponding quartz seeds. It can grow into the corresponding high -pure crystal in the water (throw it in the water, and pick it up in the middle.Will be reset, and you can invest multiple copies at a time, which will grow at the same time). One seed and two crystals, which is equivalent to increasing production and high purity.Replace ordinary crystals (do not make too many seeds in the lower quartz, and rarely require high -purity Xiajie quartz).

4、陨石罗盘，用处是寻找陨石并获得陨石箱子中的四种模板（陨石箱子在陨石正中间，含有的模板最少一种最多四种，看你是欧皇还是非酋的时候到了），每There is only one type of template. The template can be copied.

5. Printing device, the role is to make various circuit boards and processors (four types of boards and three processors). In the later period, there are five automation, and one in the early stage.

6. Wire, there is no difference between using quartz system or Setz quartz crystal system. What ME machine turns to face is that you can only use the ME wrench with the ME.In fact, there is no turn.

7. Crystal birthprs, accelerate the growth of the seeds, can be checked in specific information. If you are in an urgent, you can create a few (five enough).

The above -mentioned machines that require energy can rely on EU and RF for charging energy. If not, please prepare a resonant warehouse, and a small amount of quartz fiber (only transmitted energy without transmission channels) or cables.

Second stage: When you find four templates, you can start.

1. Because all the basic ME devices require various processors, first talk about printing.The first is four kinds of boards. Put the template into the upper grid. When the material is placed in the middle grid, the corresponding board can be made (the templates and materials are one -to -one, so don't be afraid to put it wrong, because you can’t put it in at all.The material is recommended to use shift+right -click, which is convenient). The processor's production is to put the corresponding circuit board in the upper grid, put the red stone in the middle grid, and the silicon plate can be put in the lower frame.Put it in the upper grid, and the two plates are okay in turn (there are a lot of silicon plates. When making silicon, try to use the lower quartz powder as much as possible and use the Setz quartz powder).

2. ME controller, the core of the entire network, and its own energy conversion function (so it is not necessary for special circumstances that there is no need to build an energy receiver). Each surface can provide 32 channels.I guess that many newcomers have died on the channel if a channel is a channel.

3. ME driver, the hard disk of the entire network, is a large box, can be used in the storage element, (the ME box is not recommended, so it is not mentioned here) it is equivalent to the cable.You can also connect the cable on the ME drive. It does not provide a channel itself and occupies a channel. After all, you are also a machine.

4. ME storage components, which provide capacity on the plug-in drive, the components of the items cannot participate in synthesis, so it is recommended to make 64K-ME storage components directly (note that it is not a fluid storage element, do not make mistakes)

5. ME terminal, check the items contained in the network and can interact; ME synthetic terminal contains the role of the ME terminal, and can be used as a synthetic table; ME model terminal, making various models (requiring blank samples), which is automated, it is automationWhat necessary, it also includes the role of the synthetic terminal, but it is recommended to do one.

6. Energy elements, store AE, can not be used when there are other energy storage devices.

Third stage: automatic starting

The input and outputs in the ME network are relatively concerned. The input points to the input to the ME network. The output refers to the output from the ME network. Do not confuse it.The fully automatic finger in this article does not need to be issued any instructions. Once there is an item, it will automatically participate in the synthesis; the semi -automatic finger needs to be issued to synthesize, and the instruction will not be synthesized.1. Cables, in general, can be divided into two categories and four small categories. The glass cables of 8 channels are not displayed in the number of channels. The intelligent cables of 8 channels are displayed.The cable does not display the number of channels, the dense cables of the 32 channels display the number of channels.(Eight channels can be used with glass cables. Anyway, you know how many channels you have accounted for. 32 channels recommend dense cables, not easy to count)

2. ME output bus, you can output items from the network, without marking, not output. It is one of the means of communication between network and external items. The transmission speed will gradually speed up until the peak.Speed ​​can be inserted accelerated card.

3. ME input bus, you can enter items from the outside world to the network, with self -drawing, without marking, one of the means of communication, the transmission speed will gradually speed up until the peak is.Insert the acceleration card.

For example, fully automatic: All ore wants to make pollination through the powder machine. You can use the cable to connect the input and output bus on any two planes of the machine. Open the output bus interface and mark with the ore left button.Items, input bus do not require markings, such as special circumstances, such as nuclear power automation, need to be marked (the machine does not need to be drawn into and pop up, and this operation occupies two channels). It is suitable for all machines allowed to be stored or extracted. Only repeated operations need to be repeatedly operatedYou can complete all the automation of such machines.

4. The ME interface can export items to the outside world or enter items from the outside world, but do not bring its own extraction function. Generally, it can be used with templates., Similar to the input and output bus.

For example, semi -automatic: I just want to powder the specified number of ore, use the cable to connect the ME interface to any surface of the machine, and mark the minerals (here is the marking minerals different from the output bus, you can mark the number and understand it as the ME interface comes with its own comesIn the cache area, when the quantity stored in the ME interface is equal to the number of marks, it will not be output. Generally, it is just a mark, in fact, it can be not marked) Since the ME interface is not attached toIf it is a panel ME interface, some versions of some modules will not pop up the items to the ME interface. They also need to cooperate with the input bus use, and need to place the model in the ME interface. HereData) Set the blank sample, put a kind of ore on the left, put the output on the right, put the model after putting it in the ME interface, you can view it in the terminal.Integrated into a memory, suitable for all machines allowed to be deposited into, just repeat the operation to complete the entire automation of such machines.

5. Synthetic memory, understand as a cache area, will store the materials you need to issue the operating instructions you have issued here, and a synthetic memory can only be stored and perform a task at a time. For exampleWhile operation, other operations (including synthetic operations) cannot be performed until the powder is over or the synthetic memory is added.(Synthetic memory can be split into accessories at the workbench, so you can make a few more low -storage synthetic memory first, and then reengly synthesize high storage synthetic memory in the later period).)

6. ME storage bus, you can use this bus to access external storage devices, such as the original box, drawer, etc., and the difference from being drawn in.View directly in the terminal. In fact, the items are still in the box, and when you store things in the ME network, you will be stored in the box first. This situation can be changed by priority.Item transmission work.

7. The molecular assembly room needs to be used in conjunction with the ME interface. When placing, only the molecular assembly room is required to contact the ME interface. Any ME interface access to the network can be used. The molecular assembly room does not take up the channel.The model (model of the synthetic mode) processed by the model terminal is placed in the ME interface, and the terminal will display synthesis. It can input the value for custom quantity synthesis. This operation also follows the synthetic memory rules.(Note that when there is only one ME interface access to the ME network, because the highest channel of the ME interface is 8, the total number of ME interfaces is 8)

8. The ME interface terminal can view the machine connected to all ME interfaces in this terminal, and can be put out of the model in this terminal, which means that you can basically not need to close the machine to complete a large number of operations (Also don't have to worry about the molecular assembly room too much to submerge the ME interface)

Because the semi -automatic synthesis of some machines only require a small template, such as a printer, in order to save the ME interface, multiple ME storage bus can be connected through the ME interface, and then the storage bus is connected to multiple machines. This can reach one ME interface control multiple.The machine and machine also need to enter the bus to extract the generated items.Example 1: The UU material generator in IC only needs to be placed in the waste and no need to take out the operation.

Example 2: The copy of the copy of the IC only needs to be taken out of the product, and the operation is not needed.

Example 3: The recycling machine in IC needs to be put in unnecessary items and the waste. Therefore, it is necessary to output the bus and mark the unnecessary items. The input bus can be marked or not marked.

Example 4: IC is installed in tank machines, put food on food, and take out the can, so you need to output the bus and mark food and empty cans. It is recommended to convert the transmission mode to a circular mode.Transmission, the output bus can be marked or not marked.

Example 5: IC nuclear power, suitable for the condition of the panel being filled with all components, because if it is not filled, after accessing the output bus, the fuel rod will fill all the vacancies.In the stick, the input bus should mark the exhausted fuel rod, otherwise all components will be pulled out and transmitted to the network. In addition, it needs to be connected to the network after the input bus, otherwise the drawing operation has been performed without the mark.

Reminder 1: The bus on a machine does not have to use the requirements of the same cable. You can all the cables output the bus, and a cable inputs all input bus, which has no impact on the network.

Reminder 2: The automatic synthesis in AE belongs to the output input judgment of the relative network.The network and instructions are completed. At this time, if you save a set of iron ingots directly into the network, the network has completed the above instructions by default. Even if your furnace is actually burned, it will not be displayed on the synthetic memory.

Reminder 3: Some of the items of some modules cannot be synthesized through the molecular reorganization room. Although the synthetic memory is displayed, it cannot be synthetic or even not allowed to be synthesized (that is, the synthetic instruction cannot be issued).Synthetic table is synthesized.

Reminder 4: Moisturize other mod synthetic tables into the network. Model models instead of synthetic models are needed.

Reminder 5: If you think this article is pretty good, remember to leave a word, otherwise there will be no motivation at all.

The remaining ME items will not be explained. The information is very comprehensive. After reading the full text and actual operation, you should understand that there should be no problem with those machines. If you have any questions or suggestions, you can comment below. Thank you for reading.

Special reminders that AE's machine layout and application are very important, especially when the number of modules is large, affecting channel occupation and transmission rates. I hope that beginners should not ignore it easily.

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +