Research Integration Automation of Dragon Research Based on AE2 Network [AE2] Application Energy 2 (Applied Energistics

2024-12-09 18:28:52|Myriagame |source：minecraft skins

After reading the product of another fusion automation tutorial

Total network

Cables of different colors are used to distinguish AE network.

Blue: Main network (raw material supply)

Red: Fusion raw material receiving and allocation

Green: finished product receiving and completion prompts

Various system parts

The transfer of the raw material: The interface of the main network is used to store the model (in addition to the raw material when making a model, you also need to add a markup item). When the synthetic request is issued, the raw material will be passed to the sub -network interface.At the top of the main network is the quartz interface, which gives the sub -network function.Below the sub -network interface is the input bus. After receiving the fusion, the stone in the interface will be entered into the main system!Note: The main network interface must open the blocking mode!

The fusion part: 1. The aggregation core and an injection (open a single item mode) connect to the AE network through the ME storage bus. After the subsystem interface receives the raw material, the raw materials will be allocated to them!Note: All ME storage bus needs to use anti -phase cards and mark stones or other tags, so that the interface will retain one item to activate the blocking mode of the main network interface!

2. The ME storage bus above the polymerization core needs to increase the priority. When making a model, put it into the first grid!(AE will supply raw materials in the sequence of grids. Priority adjustment can ensure that the core of aggregation receives the first grid item!)

3. Me standard sender adjustment to a signal when the capacity is greater than or equal to 1!When the item enters the sub -network, the ME standard sender will send out the core of the redstone signal activation aggregation core and start fusion!

Complete tips: Complete, the product under the core of the product is in the ME input bus to the ME storage bus input to the funnel bus and then input to the main system interface 2.The signal, the ME input bus below the sub -network interface is activated, and enter the mark item in the interface into the main network!Note: The ME input bus under the aggregation core plus several acceleration cards, so that the number of products can be quickly transmitted to prevent multiple activation pulses!

The pulse generator in the redstone plan and its amplification version

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi