your current location：首页 > news>Use sodium as a "catalyst" high -speed decomposition water [GT5] Gregtech 5 (Gregtech 5) Minecraft Game

Use sodium as a "catalyst" high -speed decomposition water [GT5] Gregtech 5 (Gregtech 5) Minecraft Game

2024-12-09 18:29:08|Myriagame |source：minecraft skins

This tutorial is set by the author to use the CC By-NC-SA protocol.

This method is suitable for version 5.09.32, hereby notify

right!Yes!That's right!Electric water is no longer an electric tiger!

On this day, someone brushed NEI when hanging up, and wanted to see what the NA on hand could do. Suddenly, he saw the following synthesis

emmm ... naOh?

So this person checked the relevant synthesis of NaOH ...

Electricly back to NA?IntersectionIntersection

Therefore, this person quickly built the following units:

This is the case!I organized it into a picture:

Electricity analysis of multiple methods including this method:

Method 1: 3 Water+1 empty unit == electrolysis == 2 hydrogen +1 oxygen unit consumes power 60000EU

Method 2: 1 Water unit == electrolytic == 1 electrolytic water unit consumes power 14700EU

3 Electrolytic Water Unit == Electricity == 2 Hydrogen Unit +1 Oxygen Unit consumes 900EU

Total 45000EU (14700x3+900)

Method 3: 1 sodium powder+3 water+programming circuit == 1 == Reverse == 3 sodium hydroxide powder +1 hydrogen consumes power 18000eu

3 Sodium hydroxide powder+1 empty unit == electrolytic == 1 sodium powder +1 hydrogen unit +1 oxygen power consumption 2160eu (this step is MV formula)

1 hydrogen unit == fluid irrigation machine == 1 hydrogen +1 empty unit power consumption 16EU

Total 20176eu

With less than half, sodium can still be lost without damage!

Why not do it yet?Mom no longer has to worry about electrolytic tungsten ore without hydrogen!

Finally: The construction method is as follows:

(The following is pure reference)

1: Complete the energy part (I use 4 high -pressure steam boilers+MV steam turbines. If you use other energy sources, please use MV -level energy)

2: Install the wires and transformers (I use LV for the inverse and irrigation machine. If you use the MV, you can not add a transformer)

3: close to the placement of anti -and electrolytic machines (pay attention to the voltage level, do not connect the LV to the MV grid)

4: Adjust the inverse output port (the square hole above the material) to make it aimed at the electrolytic machine and set the "Item Auto-OUTPUT)

5: Adjust the output port of the electrolyte so that it aims at a fluid container (I use an EXU cylinder) and set up "Fluid Auto-OUTPUT".The container is used for oxygen.

6: Place the fluid irrigation machine.

7: Use the log (AE2, EIO, etc. that you have installed with the logistics system. GT's own seems not possible. I use EXU's ignorant energy logistics).To the anti -(sodium powder), the fluid filling machine (hydrogen unit).

8: Draw the fluid in the inverse and the fluid irrigation machine, and pour it into the same fluid container. This container is used for hydrogen.

9: Pull out the items in the fluid irrigation machine and put it in the electrolytic machine (empty unit).

10: For the transformation of the upper water pipe, you can do it!

I hope everyone is happy to electrolytic tungsten ore!There is a hydrogen without tungsten ore electrolytic hammer

more news

MORE +