your current location：首页 > news>Curvature driver: How to use the transportation equipment [WD] curvature driver (Warpdrive) Minecraft Game

Curvature driver: How to use the transportation equipment [WD] curvature driver (Warpdrive) Minecraft Game

2024-12-09 18:29:10|Myriagame |source：minecraft skins

This tutorial is set by the author's setting without permission.

This tutorial was completely explored by myself. If there are any errors, please forgive me!

The transportation equipment is actually a very useful thing for transmission equipment. It can not only transmit yourself, but also transmit animals, monsters, and even drops!

Display the main blocks used in this tutorial: Don't ask me why I have no electricity equipment

First of all, prepare the core of transportation and provide it with electricity. I forget the direction of MFSU

Then put the computer next to the core (I use the computer of Computercraft), turn on the computer, you should see this picture:

This picture is so familiar, isn't it the core of the spacecraft?

This is the interface for setting the name of the transportation room, set one casually, and then return to the car (the name I set is 1):

There is no broadcast frequency yet. As long as we use any sound fork and right -click to the core, we set the frequency:

After setting, there will be prompts (boxes), and you will also find that there are changes in the core (circle).

Then set the transport beacon:

First hold the transport beacon, set the remote position of the beacon to the core Shift+right -click: (also there will be a prompt (box))

Then put the beacon in your planned position, and use the wire to supply power from the below (the wires below the beacon are best insulated). When the beacon is electrical, it will be automatically activated.You can only place one beacon, and you can only have one beacon activation if you put two or more beaches)

If you want to open the/off the beacon, press Shift+right -click to the beacon, and it will display "Toggle Success! (Successful switch!)"

This completes the first step of two -way transmission.

Then build a transportation platform: first place a transport equipment scanner in the middle, and then set a circular to a transport equipment container around the scanner, and the transportation platform should be placed in front of the core of the transportation, as shown in the figure:

Then go back to the computer and press the "L" key at the transport interface:

Then press the "E" key, you will find that there is a line of words underneath:

Standing in the bubbles of the transport station/transportation beacon, a light that surrounds you will appear around you: (other animals/monsters/falling objects)

As long as you wait for a few seconds in the light, you will automatically transfer to the other side!

Also pay attention to:

However, after each transmission, the transportation beacon will be automatically closed .. And each transmission will deduct half of your blood (10 o'clock, 5 red hearts), with a few seconds of poisoning effect

The transportation beacon can not only be used on the ground, but also can be transmitted in your hand (currently it cannot be transmitted like this. If anyone knows the solution, tell me)

step:

First prepare a beacon that sets the remote position

Then place the beacon on the ground, use the wire to be fully charged, and then dig it out with the manuscript.

(This is the label of charging)

Then turn on the computer, press the "C" key at the transport interface:

Press Enter after setting: Press the car after writing and exit.

Therefore, when the transportation room is open and the transportation beacon is in your hands, blue bubbles will appear around you, and you will start to transmit you

But because the unknown reason may be BUG, ​​this method is not possible, you will kill you directly (except for the creation mode)!

And when you right -click the computer again after you die, the game will directly retreat!

Now introduce the last method: only use the transmission table for directional transmission.

I made another transportation equipment and named it "2":

Open the computer, press the "C" key at the transport interface, set the energy coefficient and return to the car: then you can set the target location x, y, z coordinates (note: the target location is the most far from the transport platform 256 square meters far away! Otherwisenot available!)

(But don't be too close to the transportation table, otherwise it won't need it)

I set the target location in front of the transport station a few compliance, as shown in the figure:

As long as you stand for a few seconds of bubbles in any paragraph, you will be transmitted to the other side.

You can send from the transport station to any place, but I don't know how to send it back ...

Finally, talk about the actual use of this kind of thing:

If your spacecraft is fully enclosed, then you can use the teleportation platform to send yourself to the outside of the spacecraft but who will make a fully closed spacecraft?

In some sci -fi self -made maps, you can use this kind of technology to transmit some NPCs (need to customize NPCMOD), monsters, drops, etc., which can also be used to transmit to different scenarios

When going out, what should I do if things are full of objects?Put the electrical beacon on the ground, throw things into the bubble, finish!But the distance between the beacon and the transport station is less than 256 square meters ... (forgot to say it)

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +