Introduce you to the high cost -effective thermal generator that has been ignored![Mek] General Machine (Mekanism) Minec

2024-12-09 18:31:49|Myriagame |source：minecraft skins

This tutorial is set by the author's setting without permission.

The versions of MEK and MEK generators used in this article are 10.4.5.19, and the MC version is 1.20.1.

Foreword: This tutorial is partially new. The purpose is to share a simple power generation solution for the pre -transition of novices.

1. Introduction-Thermal generator with high power generation

We can see that the thermal generator in the figure below generates 168.26FE/T power generation in the passive mode. Of course, by default, the power that can be generated by a passive mode of a thermal generator is 48.18fe/T (when and and and and and.When seven magma is adjacent to it), it is not difficult for us to have this thermal generator must have a source of external thermal power.

Let's take a look at the picture below. The battery receives 261.63fe/T input, and I only use the passive mode of 5 thermal generators (48.18*5 = 240.9 <261), and 20 electricity is available out of thin air.

Second, teaching-how to make high-power heat generator with high power generation

First of all, set a thermal generator that can touch the magma itself, and then put a thermal generator on the top of the generator, which is also full of magma. At this time, we will find that the power generation below will find the power generation belowDue to the heat above the machine, the power generation became 96.30≈48.18*2, but the upper generator still had a power generation of 8.85, which generated a total of 105.15 power.

After testing, the higher the generator is stacked, the less the void electricity generated.

Third, plan

The purpose of this tutorial is to share a simple and reliable and cost -effective power generation solution that can be used in the early stage, and our protagonist thermal generator, the production cost is 3 iron 1 锇 2 copper 2 wooden boards 1 melting furnace, ignoring the wood board and the furnace, we will create first10 thermal generators and consume 30 iron, 10 锇 20 copper, to make a simple thermal generator array.

After pouring the magma, we can see that the power generation is 525.77fe/T (525> 48.18*10), and only 30 iron 10 锇 20 copper can get more than 500 power generation.

In contrast, the power generation capacity of solar generators and senior solar generators is simply outrageous, and the required materials are also outrageous.

Fourth, conclusion

From this, we can go to a thermal generator supply solution with simple operation, stable power generation, and high cost performance.

PS: I am also a novice. Because the high version of the mining is transformed, the mining is either dead or on the way to death. Therefore, mining is really a very painful thing for me.It has been greatly strengthened, but many tutorials are just mentioned the passive mode of the thermal generator capacity of the power generator, and the wind or gas power generation is recommended in the early stage.If there are any errors or better recommendations in the tutorial, please correct the

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi