your current location:首页 > news>Alloy Forgery officially given an automation solution Alloy Forgery Minecraft Game

Alloy Forgery officially given an automation solution Alloy Forgery Minecraft Game

2024-12-09 18:32:09|Myriagame |source:minecraft skins

Translate from Alloy Forgery Wiki

Since 2.0.0, the degree of automation of forging furnace has been increased.Now, you can use funnel to achieve automation of forging furnaces.

As shown in the figure, enter the fuel on the left and the mineral on the right.

A brick below the forging furnace can also be replaced with funnel. Like this, the forging furnace will work

You can also use the funnel mining car, but this can not destroy a block under the forging furnace, like this

Left error, right right

The input method of the module may not be supported

Use mechanical power for experiments, the results are as follows

The conveyor belt cannot be used, because the shape of this forging furnace is too tricky, just blocking the conveyor belt

Fullets, bronze funnel-can be placed on the side input, cannot reverse the order of fuel and minerals, cannot be output below, cannot interact on the front of the controller

Single-cannot be output input

Power arm-cannot be directly input and output

Display Links-Cannot be used as a display source

Since 2.0.8, the funnel will stop input automatically when the furnace is working.

Input logic of the forging furnace: Each time it is added, it is automatically filled in the next unfilled grid instead of stacking existing grids. It is suitable for the original funnel. It is also suitable for the logistics method of the module., Not stacking the previous one

Example: Holding half a group of thick iron into Anshan funny bucket, after plugging, it becomes like this

Then hold half a group of coarse iron Saian Mountain funnel, and it becomes like this

At this time, the forging furnace was launched. At this time, the thick iron was plugged in the Anshan rock funnel, and it could not be input. At this time, when using the power arm for input, the power arm would not work.

In larger devices or older versions, redstone needs to be used to automate more effectively.For this reason, you can install a comparator on the forged furnace controller, and it can be placed inside the forging furnace.

This forging furnace will also work, because the multi -square structure does not include the air inside.