your current location：首页 > news>Basic gameplay explanation [ER] Extreme Reactors (Extreme Reactors) Minecraft Game

Basic gameplay explanation [ER] Extreme Reactors (Extreme Reactors) Minecraft Game

2024-12-09 18:32:20|Myriagame |source：minecraft skins

This tutorial is set by the author's setting without permission.

1. Reactor

Simple tutorial: As shown in the figure, there are three layers from top to bottom, with the first and second layers of the left and middle, and the third layer is a 3x3 reactor shell.Among them, the access terminal input raw materials, output waste, RF energy output end output energy, and the controller GUI panel click the green arrow Active Reactor in the lower left corner to start the response.

Detailed tutorials (the screenshot is for reference only, the specific size and core block position can be allocated on need):

#Brief introduction: The reactor is a cube multi -block structure with the smallest size of 3x3x3.

#Composition: As shown in the figure, the first behavior must be square, and the second behavior can be optional.

(1) peripheral structure: Frame (the edge of the cube, including the vertex) must be composed of "reactor shell".Noodles (excluding edges) consisting of "reactor shell" or "reactor glass" and core components (the core components are specific below).

(2) Internal structure: It can be empty and can be composed of "reactor fuel rod".The "reactor fuel rod" needs to penetrate the machine.There is no "reactor fuel rod" and the bottom can be filled by "reactor glass" or "reactor shell".

(3) Core blocks: Among them, "reactor", "controller", "access port", "energy interface" (energy interface "(self -selected energy type)/" reactor cooling interface "is necessary, at least one machine can be placed on each other (It does not include edges, including above and below) to replace the "reactor shell" or "reactor glass".The role:

Controller: Manual control reactor switch, observe the state of the reactor, set up automatic/manual transfers of nuclear waste.

Access port: Fill the reaction fuel and remove the nuclear waste that has been removed.

#产产 method:

Optional 1: Energy interface: Output nuclear reaction generates energy.Directly output energy from the reactor.

Optional 2: Cooling interface: Input water/output water vapor generated by water generated by nuclear reaction heat (Note: This MOD water vapor is exported by liquid pipes, but in reality, water vapor is a gaseous water, which is gas. It is recommended to put two in advance.Once out.

As shown in the figure below, after the internal, external, and cores are completed, the "reactor shell" and "reactor controllers" will change, which represents the success of the construction.

2. The turbine must be able to see it, it is not troublesome, so there is no simple tutorial.

#Brief introduction: The turbine is a cube multi -block structure, the smallest is 5x4x5.

#Composition: As shown in the figure, the first behavior must be square, and the second behavior can be optional.

(1) peripheral structure: Frame (cube's edges, including vertices) must be composed of "turbine shell".Noodles (excluding edges) consisting of "turbine shell" or "turbine glass" and core components (the core components are specifically see below).

(2) Internal structure: The second layer (the first layer is the bottom surface) from the bottom to the center is the "turbine rotation shaft" eight blocks around 1 ~ 8 arbitrary metal blocks (the iron block in the figure is for reference only.Metal types and quantities affect power generation efficiency) (After testing, it is not necessary to be in the center of the center. For example, the horizontal layer is 4X4 or 3X4, which can be surrounded by metal blocks).In addition to the remaining layer of the top surface, the "turbine turbine rotation", the "turbine rotation shaft" (only four directions before, left, left and right, asymmetry) is "turbine blades".The flat square above and the top surface must be the "turbine rotor bearings". The squares below the flat surface must be "turbine shell", which is similar to the "reactor fuel rod".

Note: The metal cubes in the figure below are MOD with steel blocks.

(3) Core block: Reference reference reactor (change the turbine to "" change to "reactor" reactor ", and at least one must be turned on. The power generation method is the same as the" reactor controller ".

After success, there will be changes in maps, as shown in the figure below.

Kind tips:

1. Although the leaves are asymmetric, the shape determines the maximum number of blades, and the excess part is invalid.For example, change the 5x3x5 to 6x3x5, and you can install a piece of leaflets inside. Although the asymmetry can still run, the upper limit of the blade is still 4. 4.

2. The Rotor Speed turbine speed of the "turbine controller" in the upper left corner reaches the best performance at 900 or 1800.Excessive speed duration may cause disaster failure.(Translated from the original English text of the GUI, the former was confirmed by the experiment, and the latter did not have it)

3. The entire turbine structure allows horizontally, that is, the "turbine rotation shaft" is placed horizontally, and the leaves are perpendicular to the bottom surface.

However, after experiments, it seems that the 5x5x4 will prompt that the machine is too small, with a size of at least 5x5x5.

The remaining core blocks are the same, and six faces can work without worrying about direction.

more news

MORE +