Reacting the relationship between reactor thermal boiler industrial turbine [MEK] MEKANISM Minecraft Game

2024-12-09 18:32:22|Myriagame |source：minecraft skins

The construction size of the thermal boiler is related to the maximum steam flow of your industrial turbine.

For example, your industrial turbine requires a maximum of 1,000,000MB steam to reach the maximum value of the trade union turbine, so you only need 10 thermal dispersing originals you built.Can produce 100,000MB steam.

Let's talk about the thermal boiler, you can use the heat of the reactor to heat the thermal boiler. After the reactor is started, the heat generated by the heat can be used to use the maximum value of thermal dispersing.The water is fine.

PS: If the unlimited pump speed mod is added as the pressure pipeline, it is easy to handle. If it is not added, you need to install more interfaces on the surface of the boiler to provide water to the boiler. The maximum pump speed of each "ultimate mechanical pipe" interface is only 6400MB/T, and the ratio of water and steam is 1: 1. 1.

PS: The "resistor heating device" of this MOD is not recommended to use. It is really not easy to use electric conversion efficiency too low, and you cannot give the boiler to fully heating

Even if it is heated to the salt towers, I recommend using a "wood heating machine". After the reactor starts the work, connect the reactor thermal pipeline.

The power generation efficiency of the industrial turbine is related to the steam volume that you instantly pumped into. If there are other unlimited pump speed mods, it is easy to solve. If not, it is the same as the boiler pumping water. Prepare more interfaces.Pump speed calculation.

Summary:

The reactor provides heat for thermal boiler for thermal boiler

The thermal boiler was built according to the demand for the maximum steam of the industrial turbine and provided steam

Industrial turbine reaches the maximum power generation

PS: (The smallest industrial turbine can be comparable to the maximum power capacity of the reactor. I tested to build a 17*17*18 industrial turbine maximum power generation of 240mrf/T, and the efficiency of reactor 98, plus reactor water less than 10mrf/T water

I added a flux network MOD to transmit power. The flux network can have the speed of unlimited power transmission.

There is also the best to use a pipeline MOD with unlimited pump speeds with unlimited pipeline MOD with thermal boiler and turbine. It is best to use.

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi