How to brush Minecraft Minecraft Brush Round Stone Tutorial Detailed Explanation

2024-12-17 06:04:18|Myriagame |source：minecraft skins

Roundstone producer, also known as a stone brush machine, can produce round stones without destroying the terrain.When Liquid Lava is in contact with Water , a cytone will be formed. The operating principle of the stone production device is based on this phenomenon.After the formation of stones, this newly formed stones will be separated by lava and water.When the newly formed stones are removed, the lava and water will be touched again, so as to form another stone.There is a variant of a stone production device that can also be used to produce stones, but this is usually difficult to make, because lava must be exposed to water from the top.

There are different designs of the stone production device. The easiest of which is to build a ten -square ditch, and a water square and a lava square are placed on both ends, which is generated when it is in contact.Because of the different range of flow, the stone will be formed next to the lava square instead of generating in the center of the ditch.

Obsidian must be avoided during construction, because when water is exposed to static lava, obsidian will form (see the tutorial/obsidian production device).The generation of obsidian destroys the source of lava.If you have something to know about different liquids, you can avoid encountering this error during construction.

Why build a stone producer?

Although not everyone will build a stone production device, there are many reasons for a player to build a stone production device

Here are the most common reasons:

It saves the time used by your asylum to go to the nearest mine.Avoid the integrity of cave or underground asylum.You have just moved to a new place, and you want to build it here, but you don't want to dig into the mine.You live in the center of the ocean.You need a lot of stones, more than you can get from mining.Build a self -repairing building (such as walls, ground, pillars).Used to decorate.For specific maps or servers: super flat world maps are often extremely lacking resources.Some multi -person survival mode servers often have a large number of stones.Custom maps or challenge maps sometimes require a cyclone productioner to play games (such as SkyBlock).Use other renewable materials such as wood to burn round stones to obtain a lot of experience.Make stones or stones and related blocks and items renewable (you may need this when using stone tools and weapons, because they are used with limited number of times, and you need to make more

Standard cycles generator has been available for a long time.But the degree of popularity has not been high, because things such as Roundstone are really acquainted.However, it is very useful in the empty island world.

Standard cycling generator requires players to plan the generated stones from the lava and collect them.This may not only cause players to face danger, but also if the drop of stone is burned by lava, it will seriously reduce efficiency.These disadvantages can be overcome with a better design. For example, by digging out a square block under the production of the cylinder, it is convenient to fall to a safe place, or collect the drops by using a funnel.

Example of Standard Round Stone Productioner:

Explain the content of the brief map: the gold block indicates any (suitable) block.To make a stone production machine, "suitable" may represent "fire prevention".The water source block and lava source may be marked with "S".Round stones or stones only appear where they are generated."X" represents the place where you should stand when you harvest the stone.

Most of the simplest turbine producers are made with flowing water with flowing lava.Place water and lava on both ends in a 10 -square -length gap, and the stones will be generated next to the lava.As long as you learn a little, you can make the entire device more compact, and even use water flow to wash away the falling stone.Both this design and the next design are easy to expand for multiple players.

Pistons -type stone production device

Pistons can be used to automate the stone productioner and reduce the number of losses.The working principle of the piston stone production device and standard rotor production device is the same, but a piston will be used to push the newly generated cylinder or stones, so that new stones can be generated.There are two uses of Pistons: one is to generate a lot of stones that can be dug back then, and the other is the function of providing self -repair with some buildings.The piston can be driven by one clock or a redstone circuit that can detect the lithium.The generated stones will slowly extend into a long line or a pillar.If you don't want to stretch these completely to 13 grids, you can "block" the road with a block that the piston cannot promote.

composition

To make a piston stone production device, you can consider the following three components:

Core: induced water and lava flow to a piece and generate round stones on the front of the piston.In general, this is built on a basic turbine production device and added piston and redstone.The clock signal generator is used to drive the piston.This part generates the redstone signal to push the piston open the stones just generated.The clock cycle can be adjusted to minimize excessive piston movements.The block detector is a simple redstone circuit from the source of the signal to the piston, and passing through two redstone relays before and after the place where the stones will be generated.When the stone is generated, the relay can allow the signal to pass through the stone and piston.Keep a certain interval to repeat the real estate signal.Any basic relay clock can be applied here well, but you will need a clock with a total interval at least 7 or 8 (that is, one 4-hour or longer).The core piston is usually not sticky.However, the design of some block -based detectors uses a viscosity piston, accompanied by a transparent (non -transmitted redstone signal) block.It will be more troublesome to use the detector, because the detector will send a signal again when the piston promotes the stone. As a result, it is a device similar to high -frequency redstone, which is not what you want.The solution is to design an additional circuit, which ensures that the circuit is output every three times.Optional part, secondary piston.Because the piston can only promote up to twelve blocks once, the core of the productioner can only produce up to 13 stones at a time.This number can be greatly increased by introducing secondary pistons.The second -level piston will push the whole row of stones in different directions.Just like the piston in the core area, the principle is to push out the newly generated circular stones, which in turn enables more stones to generate.The first -class secondary piston can also be used to push the stones directly to the building to be repaired.The secondary piston can be designed to activate with the same clock signal generator, or use the detection circuit as the core piston.But doing this may appear noisy, if you have a bunch of secondary pistons.In addition, you can also design an exclusive clock or detection circuit for the second -level Pistons.Stone producers will generate stones when the lava is in contact with water.The stone can be slightly faster than that of the stones, and it can be collected with accurately collecting the enchanting.Using this smoother stone construction also makes these self -repair buildings look more chic and different.There are few stone producers that do not use pistons, because lava needs to be located directly above the generated stones.Lava must flow in front of the piston and contact water.Just like in the stone production device, a separate piston can only produce a line of stones with a maximum of up to 13 square meters at a time.

Because stones are tapped faster than round stones, priority choosing stone production machines can make time use more efficiently.Semi -automatic stone production device

Press a button, this device will generate 24 -square -grid stones.And, because it flows through the water based on the lava (not from other directions), you don't need to worry

Starting from the places where the stone will produce.

Find a place.It should have a space with just 4 square meters and in each direction. At least 4 square meters are at the top of your selected area, and a transmitter is placed downwards.Put two upper and lower adjacent blocks on the floor below the transmitter.The type of blocks use depends on the type you intend to use.If you intend to use diamond pick, these blocks should be obsidian.If not, you can use minerals other than coal mines or lower quartz ore, or you can use mineral blocks other than coal mines, quartz blocks, or red stones.Iron ore and gold ore do not need to collect accurately collecting enchanting picks.If you intend to use stone picks, do not use iron ore, lapigishite ore, iron blocks or lapigraphic stones.Place a fence or lower brick fence in a 4 -square -free area from 2 square blocks.These are corners.The four fences are connected to the diagonal fence or lower brick fence.Place the water source on the floor (not on those two squares) and finally put a lava barrel in the transmitter.

You will also need a redstone circuit to put the launcher and retract the lava.To build this circuit, you will need to work above your future stone production device.The following steps explain how to make a duplicate circuit.

Place a viscous piston upward.In the viscous piston (adhesive piston should be able to push this square. If you are not sure, go to the piston page to see which block cannot be moved by the piston).The block should not be used).Place some red stone powder.The line composed of redstone should be connected to the transmitter.Connect this line to a block with a button on it.(Make sure that this block is not directly above your brush stone field. In this way, you can press the button outside the stone field to easily brush the stone.) To make the blocks placed on the viscous piston transmit the redstone signal, you must need to transmit the redstone signal.Put a redstone relay facing the negative side in the front of the opposite, and then adjust the delay of the relay to 4.Put another relayr who does not toward red stone powder.The direction of this relayr should also be different from the direction of the previous relay.Repeat steps 5 and 6 until you put 4 relayrs.Make sure that the direction of each relayr is different.If your placement is correct, you will find that you will not be able to put red stone powder in front of the last relay.Its delay should also be set to 4 pits.Connect the redstone powder in the middle of the last two relayr to another redstone circuit and lead to a viscous piston.The circuit contains a total of 5 relayrs, and four of them are set to a 4 -in -a delay.Make sure that this circuit does not connect other redstone circuits.Now your stone building is completed.Press the button to make stones.

Compact Round Stone Production Machine

How to build a compact stone production machine:

Dig a 4 -square ditch.Dig out a square block between the middle two grids.Put the water on the small side.Put lava on the other side.Digging the stones.

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi