The actual application tutorial of metal treatment [H & C] Heat and CLIMATE MINECRAFT Game

2024-12-10 17:45:42|Myriagame |source：minecraft skins

This tutorial is from MC Encyclopedia (MCMOD.CN) using the CC By-NC-SA protocol.

This tutorial applies to all metals that require heat treatment

Most of the metals in the heat and climate need to be processed after the appropriate climate conditions can be obtained

We take "steel" as an example

First of all, it can be seen through Jei. We need to put iron powder or fragile steel blocks on SMELTING 1500 or UHT 3000 (ultra -high temperature) temperature, DRY (dry) or normal (normal) humidity, tight (strictly tight)) Or the normal (normal) ventilation environment can become a hot steel block

Temperature: The combustion room can be heated to the nearby temperature to the 1,500 -level temperature of SMELTING, but it requires Wind (wind) -level ventilation to work.In the early stage, the aircraft was used to manually generate wind, and the wind turbine was used to automatically send the wind turbine to automatically send the air offer in the middle period.Like melting stainless steel, it requires a temperature above the UHT 3000 (ultra -high temperature), so you can put a heat exchanger above the burning room to increase the temperature.

Remark:

Hot exchanger: Get the temperature from the box below, pass the 6F torque to generate a high -level temperature on the red side of the red side of the Stage level, and the blue surface generates a low -level temperature;Two levels of temperature.

Jurcao: Pass 6F torque to generate Wind -level ventilation in front, and there cannot be block blocking behind.

Humidity: The humidity of most groups is normal (normal) like the ocean.

Ventilation: Normal (normal) ventilation needs to be closed in a closed space, you can take a small room.Some metals need a TIGHT level of ventilation. Just seal all the space in the room with a block without temperature without the melting metal

Actually it can be made up like this

The conditions are met. Now as long as the blocks that need to be furnace are placed in the room to provide fuel for the burning room, 100tick is melted.If it is steel, stainless steel, tool steel, titanium melting after melting is thermal steel (titanium, tool steel, stainless steel) block, so it needs to be cooling back to the fire

Cooling: Cooling requires wet (wet) or UnderWater (underwater) level of humidity.Dig a 3*3 size pond filled with water, put the hot steel block at the bottom 100tick, it will become a cooling steel block

Fire: Inflection requires an OVEN (oven) level 220 temperature.Dig a pits of 4 squares, one, and long, and the magma cubes are placed on the bottom, two cooling steels are placed, and the last grid uses any temperature without temperature to block 100tick. When you open it, you get the hot steel block.

Remark:

1 When the metal cubes are changed, there will be a sound of change. You can judge whether it is refined by the sound.

2 Steel, titanium, tool steel, stainless steel any steps failure will produce fragile steel (titanium, tool steel, stainless steel) blocks, which can be used as raw materials

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi