your current location：首页 > news>IC2 practical skills and details [IC2] Industrial Age 2 (INDUSTRIAL CRAFT 2) Minecraft Game

IC2 practical skills and details [IC2] Industrial Age 2 (INDUSTRIAL CRAFT 2) Minecraft Game

2024-12-10 17:46:05|Myriagame |source：minecraft skins

This tutorial is set by the author's setting without permission.

Industry 2 practical skills and details

Through some techniques and details, help you quickly advance industry 2 automation.

Note: The samples used in this article are the industrial 2 experimental version. The official version (1.9.4 and above versions, the same below), please pay attention to the voltage matching.

1. The machine that can be integrated should be integrated as possible

As we all know, after adding to 8 overclocking, the powder beating machine cannot reach the maximum rate through funnel leaks.As shown in Figure 1.1, after loading 14 overclocking, it will cause serious obstruction.

Figure 1.1 Loading 14 overclocking powder machine stopped working due to blocking

As far as the machine is filled with overclocking, the funnel can no longer meet the needs of use.

At this time, we must introduce a concept, that is, integrate as much as possible between machines and machines, machines, containers, containers and machines to avoid connecting through funnel.

As shown in Figure 1.2, we need to introduce two upgrade components to help us realize integration (if the fluid involves fluids, the fluid pops up and upgrade).

Figure 1.2 loads the fascinating machine that is pumped into the upgrade and pop -up upgrade

When there are more than one input and output target on the six planes, such upgrades should be set up.For the settings of the pop -up direction, please refer to the ejector upgrade

Integration sample: Automatic processing of mineral powder and burning ingots

Putting a scheme Plug -in plug -in loading situation

2. Disassemble the function when necessary

For some machines, such as "fluid/solidarial cans", it contains a variety of combinations. Among them, the "hybrid fluid and solid" function actually covers two steps: mixing and tanks.Put the container or the container, and the mixed fluid will be loaded into another space (commonly known as the sink).

Figure 2.1 The hybrid solution caused by excessive green stone due to insufficient empty units enters the right fluid space

As shown in Figure 2.2, at this time, even if we invest in robots and more empty units, the tank machine will not put the cooling liquid into the unit, which will cause the system to block.

Figure 2.2 Cooling liquid that cannot be installed in the empty unit

In this case, we can use some to make up for measures to save the greenite and coolant.There are mainly the following processes:

a. Remove the green stone and cooling solution unit

b. Exchange the fluid space on both sides

c. Switch the pattern to "fill the fluid in the sink to fill the unit"

d. Take out the empty unit on the left, and then take out the right coolant unit

f. Knock the machine and re -arrange.

However, the above process is too cumbersome, and many strange problems will occur if they are not careful, and I won't go into details here.

Is there a way to avoid the above situation?At this time, we will introduce a concept, that is, the function will be split and divided.As mentioned above, the function of hybrid fluids and solids actually imply two steps: mixed and tanks, so we can separate these two steps. To introduce a sample directly, we can understand this concept.

Example: production of cooling liquid unit

The placement of the machine is shown in Figure 2.3. Due to cost considerations, two "fluid/solidar cans" were selected. In actual application, it can also use "fluid/solid cans"+"fluid cans".The matching scheme.For the internal mode and upgrade component scheme in the machine, please refer to Figure 2.4 and Figure 2.5 (the first -class ejection upgrade is placed in the pump, which is not reflected in the figure).

Figure 2.3 Model and mode description of the machine

Figure 2.4 The fluid/solid installation machine used to generate coolant

Figure 2.5 The fluid/solid installation machine used to load the empty unit

Summarize

The above is the two most commonly used techniques in my survival. This article is written here, and the issues of time and feedback are updated.

Another: This is the first tutorial I wrote, and because of my limited ability, there are more or less missing or missing errors in details, welcome everyone to make opinions and suggestions to me.

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +