2024-12-10 17:47:35|Myriagame |source:minecraft skins
Review
The circulating route in the steam is one of the RBMK core technology routes. The fluid heating device is heated through various types of steam except for low -voltage steam to provide a number of times higher than the reaction heap core to provide several times higher than the average steam pipeline.The situation needs to be tested).The produced steam can be generated by a turbine, and the thermal power required for the machine that requires heat is provided by the heating heater.Below, I will describe the different application prospects of the special technical route of the steam internal circulation RBMK.
Application prospects for the circulating technology route in steam
In the nuclear energy application of the HBM module, two different categories: "nuclear power supply" and "nuclear heating" can be divided.), More universal.The latter directly uses the scenes (for example: petroleum refining, metallurgy, etc.) that use the thermal energy supply produced by the reactor, which is more dedicated, but the use of nuclear fuel thermal energy is more efficient.
I will discuss two technical routes separately:
1. Internal circulation of steam is applied to nuclear power supply
In the figure: a Victory Day series RBMK with the Victory Day in the Steam Internal Circular Architecture
The heat dissipation scheme adopted by the circulating core in the steam is to keep the steam from continuously converted between different levels (such as thermal steam-ultra-heat steam), allowing lower-level steam to absorb heat in the pile core, and higher levels of steam in the pile core core cores in the pile core coreExternal expansion and deformation back to low level steam.This allows the huge space left by the condensate system in the unit system, which is conducive to the concealment of the core and the reduction of the engine volume.At the same time, this brings a disadvantage -because thermal quality needs to be heated in advance to pass the reactor, so the heating equipment such as class boilers and the Nocnox reactor is required during construction.Hot, this allows it to cover a large area during the preparation period, and it is necessary to pay attention to the continuity of water supply and power supply when starting cold.A more feasible solution is to allow the heating equipment to prepare a large amount of thermal agglomeration and install it in advance. When necessary, install the pile core through the structure of the buffer storage tank on the pipeline.
During the operation, the circulating core of the steam is beneficial to the high heat dissipation brought by its special structure to burn uranium fuel fuel (SA-326 fuel has not been tested and there is no plan).However, due to many problems in HBM's fluid system, there may be uneven random thermal distribution during operation (as shown in the lower fluid heater in the lower part of the figure, the thermal heating device is significantly reduced).Can wait for Bob to solve the problem of distribution of fluid systems.This may cause the local overheating of the core and melt.In actual installation, you can consider that the opposite side of the opposite side of the phenomenon of thermal media can be made to increase the overall fever of the nuclear fuel, but please pay attention to the number of fluid heater with a reduced thermal medium at all times.When the medium, insert some control sticks immediately!
In summary, the internal circulation reactor of the steam is suitable for some scenarios with strong and high hidden requirements on small micro -miniaturization of nuclear energy.In the face of possible enemies, the huge amount of water fog emitted by the condensation system is an important guarantee for the hidden base. In addition, the small body volume of the core and the thermal quality that can be prepared and stored in advance also allows it to rebuild it after the base was reconstructed at the base.It can quickly recover and provide electricity support for the reconstruction.In addition, at the space station or alien ground base, when emergency construction or scarce space and inadequate energy supply, small and miniature aerospace steam internal circulation RBMK can provide important guarantees for engineering construction.
2. Internal circulation of steam to heating
In the figure: Use a small steam internal circulating core to perform incomplete crude oil refining line for heating power supply
In the above, I have mentioned the heat dissipation principle of the circulating core in the steam, so I won't go into details here.The thermal material of the circulating core in the steam is two different types of steam, so it can easily generate a HU in the heat exchange heater.For example, in the oil production line, we use the HU heating coking device provided by the heat exchanger heating device to heat up the small steam supply catalytic tower to produce small steam supply catalytic tower. Among them, some of the richer steam can also be used for power generation compressors, plus plus power consumption, plusHydrogen devices, vacuum refineries and other equipment, won't go into details here.
Because the high thermal value of nuclear fuel and the internal circulation architecture provided by the steam circulation architecture provided by the method of getting heat from the circuit, this allows the heat source to achieve a good miniaturization level, which is more efficient when heating.The power operation can drive the operation of the entire production line, extend the life cycle of a furnace nuclear fuel, and also make it possible for long -term continuous production without the external power supply and consumption of its own products.
However, there are advantages and disadvantages, and the complexity changes of the heating piles are pre -set at a reasonable level at the first pile.In addition, during the actual test, I divided the cylinder of the pile of cores into two different purposes: heating and power supply. When I was running normally, I found that the heat of the heating side was significantly reduced.Therefore, in actual installation, please do not use the fuel rod that will increase as the consumption will increase as the consumption will increase, which may cause the heating fluid heater thermal consumption.as a result of.
Summary and outlook
All in all, the inside of the steam can complete the production tasks in some special application scenarios.However, its special structure brings difficulties in the popularity to general scenes.At present, the main research direction of the steam cycle core is in the aerospace and ground temporary modular modular reactor units quickly replaced cheap nuclear fuels and runs reliably. At the same timeThe technical route of the sword in the internal circulation has a more balanced performance.Finally: I hope that the once brilliant technical route in the steam will continue to glow and heat, and will not be hidden by the snow.
Tsarevaniv
2024.7.10
Reprinted, please indicate the original author
National Service DNF Dark Ni
2025-01-28 09:19:27The new screenshot of the be
2025-01-28 09:18:57The 15th anniversary wallpap
2025-01-28 09:18:273DM Xuanyuan Sinicization Gr
2025-01-28 09:17:57French magazine is the first
2025-01-28 09:17:27The sneak game "Republic" wi
2025-01-28 09:16:57The story between humans and
2025-01-28 09:16:27Capture "Trinity 3: Artifact
2025-01-28 09:15:27Wind direction change "Myste
2025-01-28 09:14:57DICE's new project "Dream" w
2025-01-28 09:14:27Pirate Minecraft Skins
Minecraft Skins
2024-12-10 04:11:27Pirate Minecraft Skins
Minecraft Skins
2024-12-10 04:11:26Master Minecraft Skins
Minecraft Skins
2024-12-10 04:11:25King Minecraft Skins
Minecraft Skins
2024-12-10 04:11:25Guide Minecraft Skins
Minecraft Skins
2024-12-10 04:11:24Dark Knight Minecraft Skins
Minecraft Skins
2024-12-10 04:11:23Sparta Minecraft Skins
Minecraft Skins
2024-12-10 04:11:23Moncraft Skins of the War
Minecraft Skins
2024-12-10 04:11:22Red Witch Minecraft Skins
Minecraft Skins
2024-12-10 04:11:22Golden Cavaliers Minecraft S
Minecraft Skins
2024-12-10 04:11:22