your current location：首页 > news>The easiest full speed permanent air -cooled fusion heap tutorial [MEK] General Machine (Mekanism) Minecraft Game

The easiest full speed permanent air -cooled fusion heap tutorial [MEK] General Machine (Mekanism) Minecraft Game

2024-12-10 17:49:49|Myriagame |source：minecraft skins

Read the front skills of this tutorial:

1. Construction of Fusion Reactor

2. Construction of dynamic storage tanks

3. Construction of thermal distillation tower

If this is not clear, you can view it in the MOD data-multi-party block structure

When building a multi -block structure, be sure to ensure that the entire structure is in a block!(F3+G can open the block boundary display)

This tutorial involves only MEK modules

MC version: 1.12.2

MEK version: 9.8.3.390

---

After reading this tutorial, we can build a full response rate with the least resource, and never stop the air -cooled fusion pile.

(Of course, there may be big guys to use less resources

---

Building needs:

28 pumps

10 filter upgrade

259 speed upgrades

3 rotary air fluid converters

1 solar neutron activator

1 Tstachway separation machine

4 resistance/wood heating machine

4*4*18 distilled tower

1 4*4*9 dynamic tank

1 fusion reactor

1 laser focus

---

Regarding the fusion fuel, we use the way to pass the polytter pile of pupae and 氚.The minimum fuel required to maintain a fusion heap is 49MB/T each each (knife) and 氚 (Sichuan).

氘氘氘:

The water pump is loaded into the filter upgrade to extract heavy water,

For the electrolytic separation machine for heavy water, you can get 氘

The conclusion is thrown first: 10 water pumps full of speed upgrades and filtering upgrades, plus the 6 -level velocity upgrade electrolytic separator, can meet the 49MB/T requirements of 氘.This configuration survival is measured and feasible.The following is an explanation. Those who have no interest can be skipped.

1 water pump full of speed upgrades and filtering upgrades can provide 5MB/T heavy water, 10 units are 50MB/T heavy water, and then 2: 2 electrolytic into 氘. Theory can provide 50MB/T 氘氘氘

Reference Putting method:

Because the flow is less than 100MB/T, it is also possible to use the basic liquid pipeline here.

---

氚氚氚:

It is recommended to build the tree field to provide the raw materials for the wood heating machine. If the electricity production is sufficient, you can consider using the resistor heating machine.Advanced solar energy also works

Build 3 salt tower (salt), 1 lithium tower (for salt), and the size is 4*4*18 (long*wide*height), and use one of the above heating devicesEssenceThe resistance heating machine can set up higher power consumption to quickly hear the heating.

Maintain the heating device of the salt tower at 3.3kk (full temperature), and the minimum power consumption is 600RF/T

For each salt tower, 6 units are needed to upgrade the water pump to supply water, and the salt water is introduced to the lithium tower.The next process is a bit around, but there is a lack of one

1: Lithium tower exports liquid lithium, connects to the rotary gas -liquid converter, 1: 1 is converted to lithium (gaseous). If you find that the rotary gas -liquid converter does not work, try clicking on the T button in the upper left corner to switch the working state

2: Lithium (gaseous) passing into solar neutron activists, 1: 1 convert to 氚

3: Convert the puppet into the second rotary gas liquid converter, 1: 1 to liquid 氚

4: Create a dynamic storage tank of 4*4*9 and guide the liquid

5: Export the liquid gangsca, and guide the liquid pheasant into the third rotary gas -liquid converter. At this point, the mirror is ready

Note: In the above steps, the rotary gas -liquid converter and solar neutron activator have at least 7 levels of speed upgrade

The following is the interpretation link:

1 full -speed pump provides 500MB/T water, 6 is 3000MB/T, and the maximum salt output of a salt tower is 300MB/T. Combined with the water salt conversion ratio of 10: 1.Maintain the minimum amount of water at full speed of salt tower.

We built 3 salt towers, which is a 900MB/T salt supply.The salt lithium ratio is also 10: 1, so the lithium output is 90MB/T.In terms of machine speed, the speed upgrade of level 7 has a processing efficiency of 128MB/T, and level 8 is 256MB/T. It is completely enough.That is, during the day, we have a stable 90MB/T 氚 supply, but the neutron activator does not work at night, so we have to do storage facilities to store the extra 41MB/T 也 (90-49 = 41).

The day of MC corresponds to the reality of 20 minutes. We simply think that 10 minutes during the day and 10 minutes at night to facilitate calculations.1s (seconds) = 20tick, 10min (minutes) = 10min*60s*20tick = 12000tick, and the 氚 consumes 49MB/T, and obtains a 氚氚 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 588000MB overnight overnight.Calculating here, we can find that the stock of a ultimate gas storage tank is 512000MB, can it be a non -stop fusion of the two ultimate storage tanks?In fact, it is not. Even during the day, the neutron activator will stop working in rainy days or thunderstorms.Making an ultimate gas storage tank array is time -consuming and laborious, it is better to use a dynamic storage tank.

The dynamic tank reserves we set up are 4*4*9*64000 = 9216000MB, 9216000/588000 = 15.7, that is, even if we encounter seven consecutive days of thunderstorms or rain, our fusion reactor will still not stop, and it has been full.Work quickly.

Reference method of this process:

Note 1: Handheld adjustment shift+right-click to switch the pipeline working status (push/pull/no) ----

At this point, the fuel has sufficient and stable supply, and then the content of the fusion pile

---

It is recommended to put the ignition device before building a gathering pile. Of course, the sooner the ignition device is done, the better, the ignition device before making the salt tower is better.

Step of ignition device construction

1: In front of the laser focus matrix of the reactor, place the laser amplifier to make the red surface of the laser amplifier facing the laser focus matrix of the reactor

2: Right -click the laser amplifier, click the button in the lower right corner to switch to the following state

3: Put a button on the laser amplifier, which will be useful in the future

4: Place laser surroundings. Note that all laser must be placed where the laser amplifier can be directly incorporated into the laser.

5: Patiently wait for the laser amplifier to charge to 400mrf

Note 2: If you do not consume power, you just want to do it quickly, you can put it like this, only the creative mode

After the ignition device is completed, you can start to build a fusion reactor. Remember to put a few more reactor interfaces.

---

After completing the reactor, the next step is to start the inspection process before the reactor. Be sure to check it carefully ~

1: Laser amplifier energy storage is greater than equal to 400mrf

2: Inject it from the two reactor interfaces

3: The in the dynamic storage tank is greater than 1176000MB (it is raining in a pile, it is also possible

4: Make sure the reactor reaction rate is 98. Click the black frame below, enter 98, and then return to the car

5: The black body radiation cavity has been placed in the reaction controller

Note 3: The empty black body radiation cavity needs to be obtained in the pouring factory with 1 carbon powder+4 gold powder.The fuel in the cavity is obtained by the chemical irrigation machine.There are very few demand, and you can move it with two gas tanks.

Ordering link:

Press the button on the laser amplifier, you can start the reactor

When a polyhedron appears inside the reactor, it means that the stable fusion heap is successful!

The production capacity of this reactor is 9.66mrf/T

Before making the guidance matrix, you can directly put a quantum transmission device on the interface to extract energy

---

more news

MORE +