your current location：首页 > news>GTNH2.6.0 Some pure AE automation assembly methods and part of the drone maintenance warehouse Introduction [GTNH] Gray

GTNH2.6.0 Some pure AE automation assembly methods and part of the drone maintenance warehouse Introduction [GTNH] Gray

2024-12-10 17:50:25|Myriagame |source：minecraft skins

This tutorial is set by the author to use the CC by-NC protocol.

This tutorial is based on GTNH 2.6.0beta3 version.

A single loading line AE automation

Because GTNH has added a high -level blocking card in the previous version, the previous P2P can not be used, and the main network interface is directly output to the subnet.

16-1 in turn is the priority of the storage bus.20-17 is the priority of the fluid storage bus.

Then make a subnet, and then the main network interface specifies the direction or paste it with a panel shape.The red frame came out as the subnet system.

Open the main network AE interface and set it to the blocking mode.Open the subnet interface and put the high -level blocking card.

The output bus can directly connect to the main network.The overall construction of the assembly line is completed, as long as it is placed in the model on the main network interface to synthesize.

Note: 1. The fastest speed is only 2T. Since you need to detect whether the subnet exists, you can't break through the AE distribution item even if the overclocking is too much.

2. When encountering a number of the same items, a group of involved formulas is required, you need to modify the formula step by step.For example, the formula below

Synthesis requires 4 grids, and 4 UHV circuits per grid. If such a model is placed directly into the interface, it will cause 16 UHVs to enter a bus and cause it to be unable to synthesize.You only need to use the iron anvil to rename the "mold (name)", and use the stamping machine to change the name of the item without stacking it.

Although the name has changed, the essence has not changed and can participate in synthesis.For example, as long as the molds of different names are changed to 12 of them, such as "yihao", "erhao", "sanhao".

Multiple assembly line synthesize the same formula

When we need to synthesize a large number of formula formulas in the later period, we can choose an advanced clothing wiring. As long as the ME input bus is used, it can be very simple to automate, but the disadvantage is that this situation can only be one formula.

So we can use the P2P-two-in-one-to-one port to make a batch input of ordinary assembly lines.First of all, introduce the P2P-two-in-one port (also P2P-ME interface): you cannot treat it as an ordinary P2P, but to see the input end as the main block, and then the output terminal will copy the input-end model; not to the input endInput items, output from the output end.It is equivalent to sharing ME two -in -one port.

On the basis of the previous chapter, replace the two-in-one interface of the main network into P2P-two-in-one connection; then use the memory card, and right-click one of them, set it to the input end (put on the model), other memory use of memory, other memory use of memoryRight -click the card to set it to the output (shared the model).Note that the output end is just shared the model, so in this case, each must be set to a blocking mode. Of course, each subnet interface must be high -level blocking card.

In order to look good in the AE network, you can set the P2P-two-in-one interface of the output end to be invisible, so that only the input model will be seen at the interface terminal, otherwise there will be a row of the same display.

Because many assembly cables are set up, databases may be required to provide flash memory, but the main port of the database that can be set by a database is limited, so it can be: the first data to put flash memory, transmit it to the next data through the database interface and assembly line data interface, and then then to the next data, and thenOutput to each assembly line.Those and so on, can be passed on all the time.

This method has its own advantages and disadvantages:

Advanced Link: You can use a Duo'an Energy Warehouse to use a laser warehouse; it cannot be executed more than the energy warehouse level formula, but the overclocking is simpler; the parallel limit is the number of grid numbers in the parallel.

Method: Unable to use Duo'an Energy Warehouse, laser warehouse; higher voltage formulas can be performed through multi -position voltage;Excessive synthetic speed will cause it to be unable to match all the assembly lines.

2.6.0 new machine drone center

This is a newly added device in 2.6.0.The overall is the IV stage to build

No need to maintain warehouses, no power supply, you only need to put the drone in the input bus that can start working.Drone Download Module's drone connection module instead of the original maintenance warehouse.

Working method: Maintain the drone connection module within the range per 20s.T1 drone range 32 blocks, T2-128, T3-512.Both the main block as the ball -shaped range.Drone per second is damaged by probability, T1-1/28800, T2-172800, T3-0.

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +