your current location：首页 > news>Mechanized basic tutoring mechanized steam power

Mechanized basic tutoring mechanized steam power

2024-12-10 17:50:31|Myriagame |source：minecraft skins

This tutorial is set by the author to use the CC By-NC-SA protocol.

As a technology module, it is mechanized to generate two ores to the world: copper and zinc ore, and the probability of generating is quite high. Don't worry about not enough.The generation of copper and zinc ore is generated at the height of 50 and below the main world, and the mining level is the most simple stone tool level. Therefore, to develop steam power, the first day of the start can be arranged.

World Generation · Copper Mine

World Generation · Zinc Mine

Copper ore and zinc ore can be melted in the furnace or blast furnace to obtain copper and zinc ingots, supporting mineral dictionaries (the mineral production of the module can be turned off in the configuration file).After that, the copper ingots and zinc ingots are pressed in the alloy furnace (synthesis of pills and blast furnaces) at a ratio of 2: 1 to get the brass ingot, and you can start your steam power trip.All steam machinery and tools provided by this module need to use brass to synthesize (the alloy furnace is not counted). Some also need to consume iron ingots and red stones, and the armor needs to use leather.

Metal furnace, material support resource package

Metal furnace GUI

Similar to the generators of other technology modules, there are two capacity equipment in mechanization -boilers and wind drum boilers. They are all machines that consume solid fuels to generate steam.The so -called solid fuel refers to items that can be used as melting furnace fuel.Of course, in order to put Newton back, you need to consume water when you generate steam.The unit that measures the energy is the amount of steam, which can be understood as the amount of quality or material.

Boiler (left) and Duqiao boiler (right)

Boiler GUI

Boilers can use the fuel value of 8 units to convert 1 barrel of water into steam (1 coal+1 water+80 seconds = 1 steam) of 1 unit. Its internal space can accommodate up to 3 units of steam.The wind boiler has a stronger production capacity, but please note that the wind boiler not only cannot save fuel, it even needs to consume double fuel and water.Compared with ordinary boilers, the wind boiler can generate steam at four times the speed. At the same time, the steam per unit of steam needs to be consumed by more fuels and water flip (8 coal+8 water+80 seconds = 4 steam).Essence

The most critical part of this module is here: steam transmission and transportation are completely different from the mechanism of power technology modules. Instead, they are in Fengnon's mouth to calculate the transfer of steam strictly according to the pressure balance.To put it simply, there are three basic attributes in any of the block/steam pipelines in the module: capacity C, steam volume m and pressure p, to meet the formula P = m/c, where the range of pressure P is 0 ～ 100In between, 0 means that there is no steam at all, and 100 indicates that the steam is sufficient.The so -called stress balance, that is, steam always moves from high pressure places to low pressure places.You can view the pressure value of the system by right -click (Sneak Right -click) the machine or pipeline through the pressure gauge.Let's take an example below.

If there is a boiler now, which contains 2 units of steam, the pressure p = m/c = 2/3 = 67%; at this time, put a charger (capacity 0) next to the boiler, and then put it in the charger to the recharger.In the empty steam drill, the capacity of the charger at this time is 2 (that is, the capacity of the drill), and the pressure is 0.So the steam will be transferred from the boiler to the charger until the steam pressure of the two is equal.From the total steam volume and total volume, the final pressure should be 2/5 = 40%. At this time, after taking out the drill, you will find that the durability strip of the drill bit becomes 40%, and the inside contains 0.8 steam.

If the boiler is empty, the drill is full (2 steam). After putting the drill in the charger, the total pressure of the system will be balanced to 40%.The durability is also 40%.

Therefore, the charger is not necessarily used to fill the energy. Putting a cylinder in it is the battery (fog).

It is also because the steam has the elasticity of the elasticity. When the steam machinery is just completed, it is not yet possible to serve. You need to add a large amount of fuel to the steam content to increase the steam content.era.In addition, you have to plan early to confirm the placement of the machine, otherwise you will lose the steam in the machine every time you disassemble (only the steam in the disassembly machine/pipe) will be lost.

When filling energy for your drill, you need to invest in fuel to produce steam at the same time, so that the drill bit is as full as possible.In particular, when using a full -capacity boiler for a empty drill, you need to invest 2 coal to ensure that both parties are full of capacity after the charge (if it is a winding boiler, it requires 4 coal)The unit steam is enough for a long time, so you don't have to worry about the fuel.

The boiler can use the steam pump to automatically add water, put the steam pump on the side of the boiler, and the bottom provides an unlimited water source. When the steam pressure reaches 10 or more, the steam pump begins to work and automatically send water to the boiler.

From right to left: steam pumps, drum boilers, chargers (drills),

Charger (gas tank), charger (empty)

In addition to the steam drill, the module also provides steam sawing, steam armor and steam jet tank.For drills and saws, the faster the speed of the steam and the greater the pressure, the faster the excavation speed, and the installation accessories can be installed on the upgrade table to increase the capacity or increase the mining level.For steam armor, the armor does not have durability value and will not be damaged. If there is steam, it will be fixed to consume steam and provides gain buffs (chest armor plus attack, leg protection speed, boots plus jump)., Extra armor, jumping, night vision, and see -through walls.Strangely, even if an additional armor upgrade was performed through the diamond, its armor value still did not have high diamond high, let alone the lower world alloy set, that is, the gain BUFF is still sloppy.Jet tank, right button holds for jet. Its driving force is not enough to fly even after installing the valve upgrade, but it can make you jump higher and farther. It is particularly suitable for ice or underwater advancement.Speed!The steam condenser is used to import the steam into the upper part of its condensate plate for cooling, thereby providing heat for the furnace above it (an external heater similar to immersive engineering).but!This stuff will continue to consume steam, even if you are not burning items; and you ca n’t turn off, at the same time, the steam pipeline does not have a switch or valve, so please remember not to connect it with your total steam source, unless you are really reallyThere are great burning demand.

The steam condenser also comes with an additional entertainment item -it can be used to scald its feet.

Steam scalding foot array

Other machinery, including the square placeder/damage device, piston, fan, etc.(Note: The steam piston is not used to push the block)

more news

MORE +