Mechanical Power V0.5 and above boiler structure automation tutorial mechanical power (Create) Minecraft Game

2024-12-10 17:51:09|Myriagame |source：minecraft skins

Foreword

After the mechanical power V0.5.0 is updated, the boiler structure replaces the original flywheel structure, which is a great change; but it does not need to be sad, it simplifies the automated process generated in the later stress.

1. Engineering preparation

1-1: ingredients

Material list name quantity of fluid storage tank 9 ~ 288 flame people combustion room/camp fire 9team engine1 ~ fluid storage tank layer Steam Whisto arbitrary stress transmission box Ren bucket 2 power pump 1 fluid pipes any redstone signal Steam Engine Steam Engine

1-2: Tools

Tool list Name number wrench 1 engineer goggles 1 hand shake crank 1

Second, build the main part

Did you see the fluid storage tank in your hand?Please build them into a cuboid.Remember that the length or width must be 1, 2 or 3, the high must ≤ 32

This time the storage tank is a 3*3*9 cuboid, so you can only put 9 Steam Engine

Then, as shown in the figure, the heat source is placed under the storage under the storage, and the author uses the flame people to combine the room.The stress generated by the campfire is relatively low, the flames are medium, and the super -warming flames are the highest.In the survival mode, the machine needs to be used to supplement the fuel. The author believes that everyone will, and will not repeat it here.The author uses the creative mode, which can use the creative mode flame cake

Third, build a stress section

Then we place Steam Engine on the outside of the tank wall. We can only place Steam Engine with the same number of layers as the fluid storage tank. At this time, the fluid storage tank becomes a boiler.

Then we put the transmission rod.How should the transmission pole be placed?As shown in the figure, when we hold the transmission rod, we will be accurate to Steam Engine. The transmission rod is not inserted on Steam Engine as usual, but a distance from the Steam Engine1 grid as usual.At this point we pressed the right, Steam Engine will combine with the transmission rod, which is the stress part.After turning on, Steam Engine will drive the transmission rod to rotate to generate stress.

The virtual shadow of the arrow and the transmission rod

Fourth, build a water supply part

This is the last part of the actual part. This part is very simple. The power pump is pumped into the boiler with the power pump. This part is completed!

Water supply part

V. Decoration

Decoration is not useful. According to your own preferences, it is recommended to use the combination of redstone signal+Steam Whistle, like a whistle.

Six, boot

Place a hand -shaken crank on a naked transmission rod to rotate it in the correct direction and use it!

Conclusion

As a new thing, it is still difficult to send tutorials in the encyclopedia. This is still under the circumstance where the data has not been filled and the Chinese is not completed.When the Sinicization is completed, all English vocabulary such as Steam Engine will be converted into Chinese.Finally, I hope everyone is happy!

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi