ROC extract machine limit speed design (1) Theoretical chapter [ROC] rotating process

2024-12-10 17:52:29|Myriagame |source：minecraft skins

Part 1

As we all know, the extractor of the rotation process is the most powerful mineral treatment system in the legend, which can theoretically reach 16 times production (partially 40 times). However, due to the special energy system of ROC's special energy systemHere is an analysis of the operation requirements of the extract machine.

1. 4 steps for extraction machines:

Step 1 The power required for 65536W, torque 512Nm

Step 2 The power required for 16384W, speed 2048 RAD/S

Step 3 The required power is 32768W, the speed is 8192 RAD/S

Step 4 The power required for 65536W, torque 256 nm

At the beginning, it was impossible to drive together in 4 steps, so sections: Step 1 and four meet the torque, step two and three meet the speed.

Therefore, someone can use 4 steam engines (in fact, equivalent to a gasoline engine) to achieve perpetual mobility.

And 512 × 8192 = 4194304W (‍ ‍ ‍ 而 而 而 at the same time) is the power of two micro -gas turbines, which can be driven in the mid -term

In the later stage, the gas turbine is required to reach the extreme speed.

2. 度 Extreme speed

Most of the ROC machine is that after the torque meets the torque, the faster the speed, the faster the speed. The limit speed is 1tick (1/20 seconds).The time and speed formula given by the column), the limit speed of the extract machine is now listed:

Bleak

Step Extreme speed One

32768rad/s

two

1048576rad/s

three

1048576rad/s

Four

32768rad/s

H (Partial reference to the ROC tutorial made by ACHANG Gentleman Sang, if you are interested, you can go to see it) If four steps are operated in the limit, 1048576 × 512 = 536870912W, survival cannot be satisfied, so it is still divided into stages. It is recommended that ROC Wuji here is recommended.The transmission, a maximum 32 times transmission, and can change the transmission mode according to the redstone signal

Use the gas turbine to use the engine control unit to reduce unnecessary output and save aviation fuel (currently there is a characteristic)

Step 1 and four variable speeds are 512nm 32768rad/s

Step two and three only need to reach 1048576rad/s, and the torque does not require requirements

Therefore, at least two non -polar transmission, and different gears of the infinite transmission require different quantitative belt operation. There are many types of two transmission settings. I will list the most stored schemes in the next part.

Bleak

Bleak

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi