your current location：首页 > news>[Novice Direction] The most basic command (Input and OUPUT) [SFM] Steve's Factory Manager) MineCraft Game

[Novice Direction] The most basic command (Input and OUPUT) [SFM] Steve's Factory Manager) MineCraft Game

2024-12-10 17:52:44|Myriagame |source：minecraft skins

=======================================================

The Steve factory is a very powerful MOD that can realize many functions such as logistics, automation, automatic synthesis, redstone control, and notice.

As long as this tutorial is an entry tutorial, it will not explain too many functions.The main introduction is the use of the two most basic commands of [Input] and [OUTPUT].These two commands alone can also help you achieve basic automation and logistics functions.

=======================================================

Introduction to the Basic Cube

When you start playing this MOD, the first thing you need to understand is [factory manager] and [factory cable].(PS: The 6 noodles of these two blocks introduced can be connected to the device)

[Factory Manager]: It is the core of the entire MOD and the soul of this MOD.With it, all your systems can be used.Just want to be a computer host.

[Factory cable]: It is equivalent to the pipeline in this MOD, which is used to expand the detection range of [factory manager], which can allow the [factory manager] to detect other blocks adjacent to the block.

=======================================================

Introduction of GUI and command

After you set up a [factory manager], right -click it to open a GUI interface (as shown below)

Three -party method

的 ‍ ‍ looks and complicated, but it is not.You can see that a small icon on the left is a command. Of course, only three commands on the left at the top of the left side are the three commands on the tutorial.

Trigger: At the beginning of all commands, that is, the command after triggering also needs him, it is the beginning of a program.

Input: This command means input, you can input the items of the specified device into the system.

OUTPUT: It means output, and output the input into the system to the specified location.

(PS: Remember the most important point, with input [input], you must have output [OUTPUT])

=======================================================

Order settings

Let's take a look at how to set the command.

Click the first command trigger (Trigger) in the upper left corner

After opening, a command box will appear.

The black dot in the upper left corner can drag the command with the mouse.

The small arrow on the right can open the setting panel.

The convex below is used to connect other commands.

Then, let's click another input (input) and output commands.

It can be seen that the raised points of Input and Output are all above and below the command.

We don't care about him first.First click the little arrow on the right side of Input.You can see the figure below

It can be seen that input, there are three sets of settings for settings to click on the right arrow to open the corresponding option.The role is:

1. Choose the device for the input items, and enter the equipment (such as the box, the device in the furnace, or other MODs) to enter the item.We will have a specific application introduction later).

2. The direction of the device output item input items.There are 6 noodles to choose from (upper, lower, east, south, west, and north).As shown below: After clicking the direction, click Activate to activate the command.

3. Enter the black and white list of items.There should be no need to introduce this.The blacklist will not be input, and the white list will only be input.Click at the question mark to select items, as shown in Figure 2 below.If you want to enter the name of the item yourself.(Chinese does not seem to work).

After all settings are set, you can use the raised point just mentioned.As shown below.It is a complete program to connect them.

=======================================================

Examples and applications

The basic tutorial has been completed, let's take a look at some simple examples below.Come and use these two bunkers.

This picture is the simplest, automatic ore system (mainly introduce the application of two commands, do not follow this).

From left to right boxes are the box of minerals, the second is our [factory manager], and the third is the stove of TE, the fourth.EssenceEssenceEssenceEssenceEssenceEssenceDon't care so much.

Let's set these devices first:

Put the ore in the box

TE's stove settings are settled and exit (personal habits go in and out)

Next we start to set up [Factory Manager], dragging a trigger and input, output.(The meaning of the exclamation mark does not work properly, just finish the settings.)

Let's set input first, click the first item, select the box as the input device.

In the second option, select the input direction to the bottom and then activate.

The third option is just a blacklist.

The input command is set (probably the meaning is to draw any items from the box and enter the system).

Let's set the command of the OUPUT.The first option is selected to output into the TE's stove.

The second option, the output position is above, remember to activate (because we have set up the position of the receiving item of the TE furnace before, in the same way, where is the position of your TE stove set, and the corresponding location must be set here.)

The third option is also the same as the default blacklist.

This is the setting of the Output command, which is roughly meaning.Pull out the items from the system and enter it from the top of the TE stove to the TE stove.

The first order is set here.Next we set the command in the second paragraph.

Similarly, input and output are dragged out again, first come to Input. This time, the device we entered the item is the TE stove.

The position of the output is below (the same reason above)

The third item is the blacklist, and I will not put the picture.

Then set the OUPUT command to output to the previous box.

The direction is casual, the same is dark.

After all settings are set, they will connect them.Our most basic application is completed.

The general meaning of the entire system is that it will be pulled out of the TE stove from the box to the TE stove. After the TE stove will be burned, it will be pulled back to the box.(This setting method is the simplest, some problems are not considered. For example, the ingots after the burning will also be thrown into the TE stove from the TE stove, which will cause the items to get stuck.related.)

=======================================================

End

This MOD playability is very high and can live almost all MOD linkages.But at the same time, you also need to mobilize your imagination to create a system that is suitable for automation, logistics and other systems according to your needs.

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +