your current location：首页 > news>"Core of Absorbing the Planet" consumes lava stackable stress generator mechanical power (Create) Minecraft Ga

"Core of Absorbing the Planet" consumes lava stackable stress generator mechanical power (Create) Minecraft Ga

2024-12-10 17:53:30|Myriagame |source：minecraft skins

This tutorial is set by the author to use the CC By-NC-SA protocol.

This article introduces a relatively simple way to generate a huge amount of stress without adding other large modules without adding other large modules.

Create's fluid system has a setting that when there is a continuous fluid in a area, a hose pulley can be used to draw this fluid unlimitedly.The lower boundary contains a huge lava sea.So why not use this almost unlimited resources reasonably?

Lava can not only be used to synthesize the lava cake and develop the final technology of Create; it can also be used as a very good fuel because its combustion time is as high as 100 items.The most important thing is that once a lava sea that can be extracted infinitely, with the melting engine, you can get almost infinite stress.

Stress generator consumes lava

First of all, a stress generator consumes lava on the lower lava sea.This is the finished product:

Features: Once starting, this stress generator will continuously output a large amount of stress and infinite lava, and does not consume any firing substances. Players do not need to prepare a tree field or a stone brush machine for burning materials separately for them.Supplement.After doing a 10,000 -square -meter magma pool in the main world, you can use it in the main world once and for all.

Total consumables: (blast furnace, melting engine, flywheel, blossom, reverse gear box, injection device, hose pulley, bronze funnel, power arm, items detector, adjustable relay, red stone firebare, red stone powder, red stone powder,, Any burn -can be refined, lava barrel) × 1, (storage table, power pump, cross gear box, fabric tank, adjustable pulse relay) × 2, small gear × 3, chain drive box × 10, transmission, transmission, transmission, transmission, transmission, transmissionSeveral poles, several entity blocks.

Next, introduce the construction process and working principle of this machine in detail.

Available version: Create V0.3.1.You need to make some small modifications for the Create 0.3 version.

First, place a blast furnace (can also be used by melting furnaces, but the blast furnace has higher stress), and connects the furnace engine and flywheel for it, and then places a slot on the top and bottom of the blast furnace.

Next, install a fan on the top of the top, and use a chain transmission box and the cross gear box to connect to the flywheel. A reversing gear box is installed in the middle to control the turmoil rotation direction:

Use an item detector to detect the facade below the furnace, and place two adjustable pulse recreigators and a adjustable relayer in turn after the object detector. The delay is set to 8 minutes, 15 seconds and 15 seconds and 15 seconds and3 seconds (if you use a furnace instead of a blast furnace, you need to set it to 16 minutes, 35 seconds and 3 seconds), and then connect to the reversal gear box through a redstone torch:

Place a table and brass funnel on the side of the blast furnace, and set the filter to the magma barrel on the brass funnel.Use the power arm to extract and store the position as shown in the figure, and place the power arm nearby.It is recommended to place above the melting engine, the most space -saving space, from the chain transmission box above to lead to motivation:

(Create 0.3 can replace the storage table with a conveyor belt)

Place a liquid injection device above the storage table to connect a power pump and fluid storage tank.From the cross gear box to the left to the left, a transmission rod is connected to the power pump to provide power for the power pump:

Place a hose in a suitable location to extract lava and connect to the fluid storage tank:

At this point, the construction part has been completed.As long as it is put in any of the burning items and a lava barrel in the blast furnace, this machine will start to operate, and continuously output power and infinite lava.

Working principle: After the lava in the blast furnace fuel column is consumed, the groove below will output an empty barrel to the storage table, and be transferred below the liquid injection device by the power arm. After filling the lava, it will be sent to the blast furnace to prepare to burn.The empty barrel is detected by the item detector when it goes through the slot, and the trigger the follower chain is performed (8 × 60+15+3) = 498 seconds of time.During this time, the reversing gearbox was in the activation state, and its controlling fan was sucking out the burning items in the furnace.First of all, we must know that the lava will burn in the blast furnace for 500 seconds; after the 498 seconds of the recumer ’s chain is over, the last adjustable relay will output the pulse length of the red stone pulse signal.The reversing gear box loses the signal, the rotation direction of the drum fan is reversed, so that it will make the burn backward in 3 seconds to return the furnace.In the first two seconds of these three seconds (just the last two seconds of the lava burning time), the burning time of the furnace will be exhausted, and the lava barrel is seamlessly connected. After three seconds, the reverse gear box will return to the activation.Status; because a blast furnace is burned for 5 seconds, the winding opportunity sucks out -of -the -burning items before the burning is completed, and the iron barrel that consumes the lava falls into the top of the bottom and enters the next cycle.

The connection demonstration between the two operating cycles of the machine between the two cycles of the machine:

This machine is only two squares wide, which can be stacked infinitely, and a fluid storage tank can be shared.However, it should be noted that the maximum infusion range of the power pump is only 16 grids. When needed, you need to connect a few more power pumps to extend the infusion range.The huge amount of stress can be used for some brushing towers using a large number of wind turbines for centralized treatment.This is a system that stacked 3 units, which can output the power of 97088SU

After the transformation, this machine can also burn other fuels, such as coal, charcoal or flame stick.

Transfer lava to the Lord World

If other modules are not installed, the use of the lower -bound door to send the lava barrel is the only feasible solution.

Use the injection device to inject the lava into the empty barrel, and then use the lower boundary portal to transfer to the main world. Use a slot, a funnel or directly to catch it with the conveyor belt, transport it to the liquid tank, separate the lava, then transport the empty barrel to the boundary.Continue to cycle.The specific method will not be repeated.

Next, you only need to dig a pit larger than 10,000 square meters in the main world (recommend 14 × 52 × 14), and then use a hose pulley to fill the lava inside.Lava.

To build a series of stress generators introduced in the Lord World, you can get almost infinite stress.

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +