your current location：首页 > news>How to have a own boat Aleki's Nifty Ships Minecraft Game

How to have a own boat Aleki's Nifty Ships Minecraft Game

2024-12-10 17:53:34|Myriagame |source：minecraft skins

The module currently only adds two types of ships, and production and assembly are also very simple.

The boat uses the paddle as the power, the cost is low, but the speed is average, and only 4 equipment can be installed at most.

The sailing boat uses sails as the power, the cost is relatively high, and the speed of sailing is affected by wind direction and wind power. However, it is faster than the boat. The equipment slot is expanded to 12, and even the powerful cannon can be installed.

Assembly ship

boat

There are no sails in the boat, so you need to prepare two paddles as power. In addition, there are paddle racks for fixed paddles.

The synthesis method of paddle and paddle frame is as follows:

A total of 6 skeletons are placed in the shape of the skeleton shape in the figure below:

Right -click the skeleton with any kind of wooden board to gradually fill the skeleton (wood cannot be mixed). Each skeleton requires 4 wooden boards, and a total of 24 wooden boards are required.

Place the paddle rack in the middle of the long side. After the two paddle racks are installed, the boat will be automatically formed, and the skeleton will also be accompanied by a disappearing without a trace of PIA.

At this time, the paddle can be placed on the paddle rack right -clicking the paddle. The paddle will also be adapted to the hull material.

After installing the paddle, you can complete the boat assembly. If the player completes assembly on the land, then congratulations to you to get a landwalk and need to pull the boat into the water.

When you come to the bow, you will be aimed at the gray cubes of the bow.

Right -click the gray cubes holding the tie rope to tie the tie rope to the bow, and then pull the boat like a traction of other creatures until the water.

sailboat

Because of the sails, sailing no longer needs to be used as a power, nor does it need to be used to install paddle, which is replaced by non -slip nails and other materials.

Non -slip nail synthesis method is as follows:

The skeleton first adopts the staircase shape of 18 skeletons. A total of 18 places are placed in the figure below:

There are 6 skeleton in the shape of a step -shaped skeleton in total:

Right -click the skeleton to fill the skeleton with any kind of wooden board (the wood still cannot be mixed, and the wood used by the hull will also determine the material of the subsequent mast deck). The stepped skeleton also requires 4 wooden boards, and a total of 96 wooden boards are required.

Place 4 anti -slip nails as shown in the figure below:

Although there is a PIA sound after the placement is completed, the skeleton does not disappear. At the same time, a blue hammer icon will appear in the hull:

The quasi -heart -aiming blue hammer will display the required materials in the next step. Right -click the corresponding material to provide the material. The steps and the required materials are as follows:

keel

8 Peel the original wood

2 deck 20 wooden board 3 去 6 peeling original wood 4 mast 12 peeling original wood 5 sailing truss 8 peeling original wood 6 main sails 16 white wool 7 艏斜 8 white wool 8 boat railings 8 fences 9 boat railings railings railings railings railings

8 fence 10 anchor 1, anchor 11 rope 8 tie rope

*All wood products are hull wood types (oak, cloud fir, white birch, etc.)

After all steps are completed, the skeleton disappears.Congratulations to you for getting large land travels.

Right -click the rope and place the gray cubes at the anti -slide nail to bring the sailing boat into the water.

Installation

Both vessels have grooves for installation equipment. There are 4 boats and 12 sailing boats.

The position of the quasi -mind -to -be -installed device will display the box -shaped icon next to the quasi -heart:

If you can't find a position, you can also press F3+B to open the collision box to display:

Most working blocks and containers can be installed on the ship, such as: box, barrel, furnace, smoke furnace, sand wheel, woven machine, note box, recorder, etc.

However, there are also some quite practical blocks that cannot be installed, such

fire!IntersectionIntersection

Cannons can be made and installed on the 6 slots on the side of the sailing::

The bearing artillery that is not filled will be displayed next to the quasi -heart, and the cannon can be filled for the cannon.

At this time, the icon of the quasi -mind will be changed to a fire stone icon. If you hold the fire stone and click the cannon to fire the artillery shells after a short delay.

Right -click the cannon can adjust its launch angle

Kind tips

Although players can walk freely on the boat during the ship's progress, if they leave the ship, all ship sails will automatically put away.

Like other creatures, if the player is too far away from the boat when using the tie rope traction boat, it will also cause the tie rope to break.

Players can dye dyes to dye the sail and hull.

For the safety of you and others, please do not jump when the boat is traveling at full speed.

more news

MORE +