your current location：首页 > news>[Automation Base] ID+integrated pipeline integration pipeline (Integrated Tunnels) Minecraft Game

[Automation Base] ID+integrated pipeline integration pipeline (Integrated Tunnels) Minecraft Game

2024-12-10 17:53:52|Myriagame |source：minecraft skins

(Recommended children's shoes that novices will not play before starting to station B to make up for the integrated power tutorial

PS: I can help the first episode of the picture quality, the back will be a lot, and the application part is very good)

########################## This

#### This tutorial contains integrated pipeline content!#####

########################## This

Before the tutorial is officially started, do the ID and the positioning analysis of the integrated pipeline: (I can also skip it if I don't want to see it, but to strengthen the understanding)

First of all, there is a saying in the integrated power series: with the Monreo, the logistics will graduate.(It can be seen that its production cost is low)

[ID] Integrated motivation adds many monitoring methods (signal input), signal processing method, and also adds the concept of the network. In addition, there are also channels of channels.

It can be connected to the cable to form a network across the air/cross -dimensional (two types of connectors). In addition, there are many types of variable card function. Personally, it is believed that its potential is more than BC door automation.

The key is that compared with AE, its cable has no channel number limit!IntersectionThere is no need to be energy!Intersection(Of course, the energy consumption can be turned on, you will be very cool)

The integrated pipeline injected the soul into the integrated power, and it added a series of interfaces, from the bus interface (various ordinary interfaces and input and output interfaces, because it resembles the AE2 bus, so it is called), it is called), it is called), it is called), it is called), it is called), it is called), it is called), it is called), it is called), it is called), it is called), it is called), it is called).

In the world interactive interface, it can be said that the cooperation with other modules can be truly realized. It can be said that it has the entire automation after it has it.

Its strength is also in the excellent transmission speed and transmission channel and ultra -remote transmission system.

In terms of transmission speed, the input/output interface speed of the item can be set up to 999,999,999 items/T, the fluid is 999,999,999MB/T, and the energy is 999,999,999fe/T (Fe = RF supports each other)

Any interface can set channels. Each channel is independent of each other and does not interfere with each other. At the same time, each channel has its own items, fluids, energy, and the same interference. The number of channels can be set up amazing.This is just a network)

One -way connector and omnidirectioner (span -dimensional) can be regarded as ultra -low -cost, high flexible super cube, or super cube with such abnormal transmission speed.

The material required for the omnidirectioner can be used for a long time for the material required for half a set of purple pornography.

However, its shortcomings are that there is no space in the interior of the network. These items/fluids/energy can only rely on external containers (after reading it, you can understand

The next tutorial will explain the functions of each component from shallow to deep

Interface and input/output relationship

Connecting the container into the network, including items/fluids/energy, the principle is similar to the storage bus of AE2. The difference is that it is the only means to add internal capacity to the network.

In the case of adding an integrated terminal, you can intuitively see the resources connected to the container in the terminal. You can see that the items/fluid/energy are divided into three pages.

For example, the RF energy can be directly transmitted to the RF container across the same channel energy interface through the energy input port. Similarly, all interfaces can set the priority to use the container input/output to the container.

// PS: The input and output are the same as the AE name, which is the name of the network. It is output from the network output to the outside world.

2. All input/output ports need to be added with variable cards to work (this content is biased towards integrated power ontology)

If the channel is clearly divided (in the same network), for example, I personally recommend setting the channel like this 0 (because the default is 0, it is easy to pump/send the wrong item), output No. 1 into AE in AE No. 1 into AE in AE, No. 2 is Round Stone, No. 3 charcoal (fire production line)

In this way, you only need to set the channel, and there is no need to set the black and white list filtering (because each channel has only one item, all can be extracted), then placed anything without an air variable card in the first position.(This location is whether to extract all items, the Boolean value True/FALSE is whether or not)

The Bur value has the default value of True. With an empty variable card means using the default value True, that is, extract all items.(Then you can set the speed to set the speed quickly ~~

Filter: But if channel 4 is transmitted into minerals (there are many types of categories need to be classified), then filtration must be added. The output of a single item only needs to use a logic editor. Edit variable card on the left side of the variable card.Just set items on the side.(Figure)

Then insert the labeled variable card into the input/output output of the specified item you need to filter the specified item, and you can input/output a single type of item. The picture above is a variable card used when only input/output iron ore.

If you don't want to output the iron ore, the other output is to set the blacklist. Then the variable card does not need to be changed. After extracting the specified item column, the "+" pages are turned on to the blacklist and adjust it to TRUE.

However, often filtering requires multiple items, so you only need to use a logic editor when editing variable cards, select the list on the left side of the editing variable card, and then set it (see Figure) 3. Finally, it is an ultra -remote transmission in terms of ultra -remote transmission.

// Tips:

Generally, the two -section cables are connected through the omnidirectional connector, and it is paired to synthesize the omnidirectioner. Of course, you can also use the existing omnidirectioner and a newly synthesized backpack.The 2x2 synthetic area in the inside is paired with a number.

For example, I take one of the two groups (put in front) and one of the synthesis in group 1 (put the back).In this way, there are 3 0.

So you can get countless omnidirectional connectors from group 0, and you can connect the network completely together.Theoretically, half of the omnidirectional connector can be saved.

Just like this: (=) means logic cable, (0) represents the omnidirectioner of group 0, (,) means disconnection

Do not change to No. 0: 0 =, 0 = 1, 1 = 2, 2 = 3, 3 = 4, 4 = 5 (a total of six sections of logic cables) using 11 omnidirectional connectors

After it was changed to No. 0: 0 =, 0 =, 0 =, 0 =, 0 =, 0 = (a total of six sections of logic cables) used 6 omnidirectional connectors

This connection can be considered as an upgraded version of the AE2 quantum network bridge because it is not energy and cheap.

I believe that after seeing this, everyone will throw away the last shadow box, super cube, space conveyor or something.

At the same time, cooperation with AE2 also provides a good idea for large automation machine blocks. Here we give a structure diagram to see. You can see freely.

(If specific examples are needed, please leave a message below. The recent server just made a block, but it is more complicated. If I can try to archive, the genuine service

It's really not possible, I will take a screenshot and communicate with each other)

Near AE2:

AE2 interface --- (arrow faces)-> Box --- (then)-> Item interface (channel set to 10001) --- (then)-> Logic cable --- (then)--> omnidirectioner (group 0)

At the same time, there is also a huge amount of energy on this cable (you know the energy interface ~)

A pile of machines full of 100,000 miles away. As soon as a person approaches the client, the block of the card 233:

Omnidirectional connector (group 0) --- (then)-> Item output port (channel set to 10001) --- (then)-> Automated machine crew (at the same time with energy output export energy) --- (Then)-> Item input port (channel set to 1, return to AE)

----------------------------  欢迎各位大佬在下方留言赐教~~~  --------------------------- (Standard ending)

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +