your current location：首页 > news>Basic idea of printed device automation: In the integration package [New Star Engineering: World] [New] New Star Engin

Basic idea of printed device automation: In the integration package [New Star Engineering: World] [New] New Star Engin

2024-12-10 17:54:09|Myriagame |source：minecraft skins

This tutorial is set by the author to use the CC By-NC-SA protocol.

The content of this tutorial uses the module environment as an integrated package in the station [NEW] New Star Engineering: World Nova Engineering -World,

The integrated package used is Novaengineering-World-1.11.2-CURSEFORGE.ZIP.

It is not a "teaching". It can only be said that the summary and review of novices in the learning process, so members of the community are welcome to supplement or correct.

(I am looking for my thoughts to optimize a messy line group. I don’t know what tutorial to see, so I can only write it myself)

[Actually I have seen this tutorial, but I can’t run meals after being built according to the video ...]

Printing device is an important device in Application Energy 2 [The following is referred to as AE2].

Before reading this tutorial, I know that you know the functions of various bus; I have carefully read this entry → [Printinger] content, and know the meaning of "front", "side", "top surface", "bottom surface".

Text content

1. Processor Pressing: The automation and thermal expansion of the printer support the single -sided input/output can also be popped up automatically. The machine with only one ME interface is more complicated.

It has only five available planes. The top and bottom surfaces must be occupied during the process of synthetic processors, and one side is also required to enter redstone.

TIPS: Remember to manually mark red stone, silicon plates and various circuit boards to the output bus, otherwise there will be no automatic extraction items in the facilities.

It is necessary to leave a surface input energy, and leave a side connection to the main network to export products.

(The integration package does not support the use of ME smart cables to directly transmit the energy for machines, and requires energy pipelines of other modules [example] for energy supply) (maybe I did not understand it yourself)

In addition, after connecting the device to the main network through the black smart cable, you should notice that the storage bus and output bus that does not directly link to the main network is in a closed state;

Only the input bus directly connected to the main network is turned on.

The solution is to supply energy through quartz fibers under the premise of maintaining network isolation, as shown below.

Summary: The use of item marks in the output bus GUI also provides filtering function by the way, so the three boxes used as a cache container can be merged into one, or directly use the ME interface.The interface work, there is only the front photo of the device in the tutorial]; the storage bus can also be pasted on the side of other pressure printers for printed silicon boards or circuit boards.

(You can copy it, but it is not recommended. It is recommended to optimize meow according to personal needs ~)

2. Silicon plate/circuit board pressure printing: When using a fixed printing template to produce silicon boards or logic/operation/engineering circuit boards and other materials,

It can reduce the number of input materials required for automation to reduce the number of input materials required to a single silicon/gold/high -purity Settis quartz/diamond through the prescription template in advance.

At this time, automation only needs to stick a bus (can also be exchanged for storage bus) and a ME interface on the side, and the corresponding model can be placed in the ME interface.

Taking the silicon board as an example, the silicon pressure printing template should be placed in advance.

This is to use the input interface to directly enter the structure of the ME network to directly enter the ME network. Obviously, a ME interface in the blocking mode can provide resources for more than one stamping device (or other devices).

It can improve the processing speed. It is recommended to increase the parallel processing capacity of the synthetic control unit while increasing the parallel device; and the silicon pressure printing template is also required in other pressure printeds.

Another processing scheme that saves channels is to replace the input interface to the storage bus, connect to the cache area with a cable and stick to the output bus.

The cache area can be the processing equipment that is synthesized by the next step with the labeling material. At this time, the storage bus and the output bus form a sub -network that needs to be isolated from other networks.

(You can use quartz fiber or use different colors of chromosome cables for isolation)

At the same time, after modifying the processing structure, the content of the coding model should also make a corresponding change.

Example: The materials required by the printed engineering processor are engineering circuit boards, silicon boards and red stone powder; but coding models can only be written into raw materials such as diamonds and silicon, because the processing structure of the main network contains diamonds → engineering circuit → engineering circuitBoard, silicon → silicon board, these two processing processes and parts of these materials into engineering processors.

Finished product display:

This messy thing is that I spent a three -threaded automatic printer that I took one night to run, but it was too messy to optimize.

After writing the tutorial, the optimization ideas are now available.

Optimized finished product:

more news

MORE +