your current location：首页 > news>Mysterious Age 4 source pipeline suction power analysis and source pipeline system instance analysis [TC4] Mystery Times

Mysterious Age 4 source pipeline suction power analysis and source pipeline system instance analysis [TC4] Mystery Times

2024-12-10 17:54:45|Myriagame |source：minecraft skins

This tutorial is set by the author's setting without permission.

introduction

I found that in the encyclopedia, there seemed to be no one to complete the tutorial or analytics related to suction power. The mystery of pure pipelines was also a few. I hope that my tutorial can help readers.Please note that there are a large number of non -official terms in this tutorial, and their significance is just to facilitate understanding.

References: NOXARS's "Pure Mysterious 4 Automatic Alchemy and Full Automatic Source Classification Library" in MC Encyclopedia, description of the pipeline in the magic guidance manual.

Inhalery and suction determination

(Note: This term is only applicable to this tutorial)

concept

Suffering is the essence of traction source movement. The source of the source in the pipeline (the pipeline here is broad) always moves to high suction to high suction.A certain source will only be trapped by the suction and corresponding source suction power.The inhalation judgment refers to the process of suction power after a six -sided pipeline judgment.The overall suction force is provided by a source of absorbing and decreased in the pipeline.The inhalation of the sub -pipeline is decayed by 1 after the inhalation is determined by the sub -pipeline, and so on.If the type of suction power is different from the source of the pipeline, it is determined to be 0.When there are multiple sources of inhalation in a pipe system, the suction source is determined to take the maximum value of each suction source at the suction source, and move the absorption source when moving.

special case

I filtering source pipeline

The filtering source pipeline only accepts the judgment of consistent with the label source, and the unbound type suction force can be determined as a suction power corresponding to the label.

II directional source pipeline

The directional source pipeline only accepts the inhalation judgment of the direction.

III limited source pipeline

Limited source pipelines divide the judgment results and divide the two as the final suction.

Absorbing source

(Note: This term is only applicable to this tutorial)

Concepts and effects: Provide the source container of suction, and its own suction power is only related to its own nature.Including source jar, source library, void jar, source cache, Olympic centrifuge, Olympic drilling machine, source crystallizer, giving birth to lights, breeding lights, etc.The maximum effective suction power is 128 (including alchemy furnace, centrifugal machine, four -fabric cache, crystal device, light, etc.). The lowest is 0 (distillers, red source cache)., But it does not make sense. The process from low absorption to high absorption sources is single line, that is, only output in one direction when multi -face and low absorption source output.The output direction is the direction of the maximum suction.When two different pipelines connected to a low absorption source have the same suction power (the same type, etc.), the flow direction is placed in the order of two pipelines, and the pipeline is flowing in the first place.

For example, in the above figure, the suction power of the left and right pipes is 63 inhalation of the ORDO. The left pipe is placed first, the right pipe is placed, and the source of the distillery flows to the left.

Preferring source (Note: This term is only applicable to this tutorial)

The source of priority inhalation is relative, which refers to the source of inhalation of pipelines somewhere. As a result, it is determined as the absorption source of the absorbing source, that is, the most absorbing source of the pipeline suction power there.There may be different sources of suction for a different part of a system, and there may be only one source of priority inhalation.

With the above theoretical basis, we can use source pipelines to achieve our purpose.

The system is basically available:

enter

The input terminal is always relatively speaking. In the process of normal firing source, the input terminal is a distiller or an ancient alchemy furnace, and the input terminal of the empty pipeline in the automatic alchemy mentioned below is a cache.In general, the input terminal is a container that provides source.

Source inventory (automatic classification):

Overview

Use the cache as a basic component to make a classification pipe.The overall source is flowing from left to right in the classification pipe, and each cache is connected to the input tank pipe.For a single cache, it is red to the right and the input tank pipe.The cache does not add a box.

Principle

When the source enters a cache, it will have two ways to go. One is to enter the jar from the pipeline (pipeline 2 ~ 63 inhalation), and the other is to enter the next cacheer (only 1 suction).When the source of the cache is consistent with the internal source of the connected jar, the source flows to the jar because the bearing suction power is greater than the next cache suction power;There is no traction, so move to the next cache device, and so on to complete the classification.

Design reference: (Note: This legend reference only shows the classification system with cache as the core)

*Source library simulation input terminals do not need to be added to the normal input from the distillers.

*The red end finger pipes in the direction of a cache in the next cache.

*When the source is full, the source will stay in the cache, which may cause blockage. It is necessary to add a void canned or crystal or a centrifugal machine.The impact is reduced.

Output

I Note Demon

The output of the magic note is the simplest. Either does not build it, the entire system is directly built in the range of the magic table;

II alchemy

The output of alchemy requires a pipeline.The common problems of mysterious people are how to balance in the connection matrix and pipelines, and the problem of blocking in the pipeline.

Covering:

Refers to the source extracted from the storage device under the high suction of the alchemy furnace than the source of the required source, resulting in blocking when switching.

Solution:

Direct too much source back into the storage device.

Reference design:

(Take the flame of the source as an example)

Among them, the cache (hereinafter referred to as a cache) that is directly connected to the pipeline of the alchemy furnace requires the addition of the wind box to make the suction power in [32, 64).

The absorbing range is to make the furnace as a source of priority suction, and to meet the cache after the furnace is blocked. The cache has enough suction to clear the pipeline. At the same time, the cache cannot absorb the middle source of the jar from the direction of the direction of the direction.

Principle analysis:

This example is divided into two steps

① Gold furnace extraction:

When the alchemy furnace provides IGNIS suction, the alchemy furnace is an IGNIS priority absorption source, and there is a flow direction as a jar to the alchemy furnace, and the cache does not work.

② Switching of alchemy furnace:

When the alchemy furnace offers Perditio suction, due to blockage, the suction power at the pipe containing Ignis is determined to be 0.The jar is determined by 0 at the directional pipeline, and the source of suction power to determine in the system is A cache.Source flow flows from pipeline to A cache.

After entering the A cache, enter the process of similar inventory inventory for classification and return to the jar.

Take ①② as a cycle.

*The role of directional pipeline:

Anthically is the flow direction of limited source.From the perspective of suction power, analysis is to avoid the jar after the inhalation of the alchemy furnace is blocked to become a new source of priority in the system, and it will be a single can to become a source of priority inhalation, making the remaining source blockage from solving.

*Different classification devices in inventory:

The category device cache in the inventory is not connected to the tail buffer, but it is needed here. If the A cache is set to the head buffer, it does not need to be connected.

*Existing problems: a bit inefficient, and not shared by many furnaces.

III single source output

Regarding the lights and drilling machines, they only extract fixed single elements, which can only be used at the corresponding source of the inventory.I personally suggest that there is another alchemy furnace next to the device rather than leading to the inventory

IV excess source processing

There are three excess source treatment methods, destruction (void jar), crystalline (source crystallizer), decomposition (Austrian centrifuge)

I void jar

Add the void jar at the end of the inventory.as follows

*Defect: Waste

II source crystallizer

Regarding the providing Terra element to accelerate the source of the source crystal device, please refer to it for details. For details, please refer to the entry source crystal.

However, there are certain differences between the rules of the source crystallizer as the source of suction power and other common suction sources.When the source crystals begin to process the internal source (or when the internal full), the external suction power is mutated from 128 to 64 instead of 0, and the mutation is 128 after processing.The source in the source crystal cannot flow out.When the crystal device is directly connected to the canned food, the problem of library clearance and cannot be imported by inventory. Using the characteristics of the suction mutation characteristics and the determination of the suction power can make the following automatic crystal device.Source.

(The figure in the figure is shared by two sources, which can be shared by multiple sources but there is an upper limit. The factors that limit the upper limit will be mentioned below.) (The following is the corresponding void jar)

Principles of the device

Suppose the inventory classification device always exists in source flow

The operation of the crystallization device is divided into two situations:

① When the source crystallizer is empty, the external suction power is 128, the limited source pipe is folded to 64, and the suction power at the filter source pipeline is less than 64 greater than 48 (at this time the canned sources of the source), so in the filtration source, the source of the sourceThe pipeline is judged as the source of the source crystallizer as a priority absorption source, flowing towards the source crystallizer, and extracting the corresponding source from the void jar; determining the source of the source of the source in the pipeline connected to the right side of the filter source pipeline as the priority source, soDo not take the source of the source of the source.When the source canned can no longer have external suction, the upper pipeline above the cans is changed to the corresponding source due to the existence of the filtering pipe, which avoids the problem of incomplete classification from randomly extraction from the classification device.It should be noted that the inhalation of the pipeline connected to the cache is greater than 1, otherwise the embarrassing situation of the corresponding source into the next cache will occur.

② When the source crystallizer is not empty, the external suction power is 64, and the permanent source pipeline is folded to 32. The suction power at the filter source pipe is less than 48, and the source cannot be extracted from the inventory.When the canned food is not full, it flows to the source of the source, and the canned source of the source flows to the void canned.

*Expansion and improvement:

If you need to set whether to crystallize this source or destroy the source, you can add the source valve in the middle of the directional pipe and the filter pipe to control the destruction and crystallization.If you need a larger cache space, you can directly add a limited pipeline and then the void canned canned cans in a limited pipe and a crystal device.Is it really necessary to be so luxurious?

*The role of the directional pipeline is to prevent priority from being prioritized.

*After an automatic classification device cache, adding a cache with a crystal device can also solve this problem, but it is easy to block and low fault tolerance.

III Austrian centrifuge

Similar to the source crystal device, the suction power of the centrifuge when the centrifuge is full, but it is not a mutation but a decay, generally from 128 to 90 ~ 100.It can be done with a structure similar to the crystal device.

It should be noted that when the crystal device is placed and the same system, the two roads must be added with valve.The cache above the Olympic centrifuge is used as an input -end input to an automatic classification system for automatic classification to inventory.Among them, the role of a limited pipeline is consistent with the crystal device and is not repeated.

Summarize

Merge the above device to get the final version, refer to the figure (three sources)

Although it is ultimate, it is just a model. The compression space and ranking are mysterious to understand yourself.

Maybe there is some mysterious mysterious energy. What I want to say is that a pure mystery can also be done. As for the source system, do you need to be stolen in the server?

(over)

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +