your current location：首页 > news>LMY agricultural development and its automation Linglong Island (LMY Sky) Minecraft Game

LMY agricultural development and its automation Linglong Island (LMY Sky) Minecraft Game

2024-12-10 17:54:51|Myriagame |source：minecraft skins

This tutorial is set by the author to use the CC by-NC protocol.

LMY agricultural development and automation

Version: 0.1.4.6

Foreword: LMY provides a very rich and powerful agricultural development system, which is compatible with agricultural automation. Therefore, when playing, you can use a variety of agricultural automation solutions, and even multiple solutions can be used.The author will introduce some agricultural automation schemes, and analyze its advantages and disadvantages and scope of applications.If there is a shortage, please tolerate.

1. Manual farm

Introduction: Obviously, pure manual cultivation, receiving, and fertilization.

Advantages: Simple, no extra machines are required

Consumption: hoe

Disadvantages: Tedicated, failed to automate access to the AE system

Applicable: Early stage

2. Enderio Planting Station

Introduction: Use the Enderio module planting station to achieve automated farms. You need to enter energy, bone meal/flower fertilizer (non -required), hoe+scissors (non -required)+ax, input water source, input seed/saplings.At the same time, it can be automatically output. It is recommended to automatically access AE with AE input bus/last shadow box.

Advantages: Large planting range (17*17), almost all crops such as support seed/sapling/mysterious flower/last shadow seeds, can be cooked with bone meal/flower fertilizer.

Consumption: energy, water source, seed/saplings, bone meal/flower fertilizer (non -required), hoe+scissors (non -required)+ax, planting station, capacitor.

Disadvantages: The level occupies a large area, with a maximum of 17*17.

Applicable: mid -to -late stage

Recommended configuration:

It is recommended to use the FLUX module to pick up nodes to enter energy for the planting station

It is recommended to use the Random module pig cage grass or AE output bus with unlimited water storage components to enter the water source for the planting station

It is recommended to use AE interface or output bus with a capacity card to input crops

It is recommended to use the last shadow box or AE input bus to enter the crops into the AE system

3. IMM gardening glass cover

Introduction: Use the IMM module gardening glass cover with AE input/fluid output bus to achieve fully automatic crop farms.You need to enter water, bone meal (non -required), energy, soil/muddy/end stone/soul sand/wire/sand, seeds (not consumed).

Advantages: Simply, gardening glass hoods can be input water sources and output crops at the same time on one side.At the same time, multiple gardening glass covers can be automatically entered AE in all crops.

Consumption: energy, water source

Disadvantages: Only crop types, do not support tree seedlings, and do not support AE placing a specific number of crops.

Applicable: mid -to -late stage

Recommended configuration:

The gardening glass cover needs to be placed in the seeds and corresponding blocks of the crops, and mushrooms need to be placed in the mycelium. The sugarcane/cactus needs to be placed in the sand.The lower world warts need to be put in the soul sand, and most of the remaining crops need to be put in the soil.In principle, if any crop can grow on a specific block, it can be automated in gardening glass hoods.

It is recommended to use the FLUX module to pick up nodes to provide energy for the gardening glass cover array. It is recommended that the number of gardening glass hood arrays is 16*7, which is just the largest number of channels that can accommodate the AE controller ring.It is recommended to use the AE fluid output interface to enter the water source for willing glass cover array, and apply AE input bus to connect the crop to the AE system.

The picture above shows a design that enters the water source using the XNET module as a gardening glass cover. It can be used as an alternative to the AE unlimited water storage element.

4. Heat and organic irrigation machine

Introduction: Thermal organic irrigation machine supports the direct input of the ME interface. Through special setting of the model, it can be quantitatively automated to synthesize crops/saplings. It can also be automatically produced and output through the bus.Energy, water sources, seed/saplings, and compost.

Advantages: AE automation is simple and flexible. Through the tree irrigation plug -in can be automated the production of trees, it can be made into array or AE alone.

Consumption: energy, water source, saplings/crops, compost

Disadvantages: It is difficult to obtain compost, especially in large quantities.

Applicable: Late Late

Recommended configuration:

It is not recommended to use this machine, unless the later photoei -compulsory compost can be synthesized in large quantities

5. LMY tree planting machine

Introduction: modular machinery attached to LMY, quickly obtain oak, rubber, and slime block without consumption

Advantage: No need to consume any quickly to get the corresponding items

Consumption: no consumption

Disadvantages: The speed is too fast. Insufficient AE system reserves in the first and middle period are difficult to store, and there are very few types of items produced.

Application: full phase, emergency use

Recommended configuration:

It is not recommended to access the AE system for a long time, it is best to stop production after obtaining a sufficient number of rubber and logs.Because the speed is too fast, AE will be burst.In the later period, AE full set is replaced with 16384K storage elements and then connected to AE for a long time

It is recommended that the above three resources use tree planting machines as the main source

6. LMY star can ingest the device

Introduction: The modular mechanism that comes with LMY can consume a lot of items to synthesize PAM various types of vegetable gardens.

Advantages: None

Consumption: a large amount of fuel, a large amount of organic matter, a large amount of biomass, a large amount of neutron dust, a large number of solar panels

Disadvantages: super huge volume, 47 square meters, very small products, huge consumption: limited to completing tasks, absolutely not recommended

Recommended configuration:

The volume of 47 square meters makes it completely unpopular. The scarce products are replaced by other more convenient, compact and fast machines.

PAM's family bucket crops can use other ways described in this article to complete fully automatic production. After the moon dust is upgraded to 64, the speed is not slow, and the integration package is rarely used in the moon dust.

7. Environmental Technology Void Plants Tiger

Introduction: Multi -square structures provided by environmental technology provided by automatic mining plant -related resources can be randomly obtained by plant resources in the list, but the construction of multi -block structure itself requires more materials

Advantages: No other consumption outside energy

Consumption: Energy

Disadvantages: The product is unstable and occupied a large area, and a large number of leaves will be obtained

Applicable: Late stage

Recommended configuration:

The construction consumption resources of void plant excavators are large, and it is recommended to build at the bottom.

It is recommended to adjust the probability of obtaining specific items by adjusting the laser lens.

It is recommended to enter the product to connect the product to the AE system through the AE input interface, the last shadow box, etc.

8. MEK Organic Farm

Introduction: MEK's own machine can be quantified to automatically synthesize specific crops, but you need to consume nutrient solution

Advantages: MEK machine supports upgrades to factories, and it is more convenient for AE automation

Consumption: Nutrition solution, energy, seeds

Disadvantages: Nutritional liquid synthesis is cumbersome and supported

Applicable: mid -to -late stage

Recommended configuration:

Organic farms are not a good choice. It is not recommended to be a farm solution for actual use

9. EXTRA2 user

Introduction: Users who apply the Extra2 module to simulate players use bone powder on the seeds, combined with absorbing funnels/collectors and other items to connect crops to AE

Advantages: Simple automation, smaller area, suitable for PAM module sapling

Consumption: bone meal

Disadvantages: Too large consumption of bone meal, the automated production line of PAM saplings is more troublesome

Application: full stage

Recommended configuration:

The user can simulate the player's bone powder according to the configuration of the above figure

The saplings products of the PAM module must be at least one tree+one leaves, otherwise the fruit will gradually disappear.Based on this, PAM's sapling automation is more difficult to unify the planning. The solution is to plant sapling multiple times to refresh the most in line with the plan.

Applicable collectors, absorbing funnels, etc. can directly absorb products.Based on this, users can access the ME interface to achieve blurred quantitative production.

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +