your current location：首页 > news>How to quickly pass through the front and middle stages of this integrated package [TFAE] Qunluan: Terra Firma Atomic En

How to quickly pass through the front and middle stages of this integrated package [TFAE] Qunluan: Terra Firma Atomic En

2024-12-10 17:56:10|Myriagame |source：minecraft skins

This tutorial is set by the author's setting without permission.

First of all, we must define it. This tutorial will be called the early stage before using the forging iron. Before the forging iron is called the middle period before the development technology, the development of technology to the late stage of nuclear power is called in the post -graduation period.

Just like the title, today, we only discuss the early and middle stages.

Start

As long as you are not born in the desert and born in the desert, the desert of the mountains is very large, and the hunger and thirst value will be quickly.The first thing is to pick up the stones on the ground, pinch various tools according to the formulas in Jei, and then cut more wood to burn charcoal in the back.

Running map

That's right, running maps are a major feature of Qunluan. You may not be able to run for dozens of grids. If you are not lucky, you may run thousands of grids. We recommend running the picture on the X axis (it will be mentioned later)

Four things you want to find for running maps:

Clane (Needless to say, use the mold, find the hoof cover fern)

Mine veins (marked the mineral particles on the ground, no matter if you use it now, mark it first)

The rock formation (this must be thousands of grids, it is best to mark it, it is used in the back)

Seeds (this depends on the temperature and rainfall of your base to determine which crop of the crops)

Base site selection

The world distribution of Qunluan is very scientific. For the temperature: Z = 0 is an absolute temperature, the larger the value of the Z, the higher the temperature, the smaller the value of the Z, the lower the temperature.Z> 3000 has an ice-free period throughout the year, and Z <-3000 is frozen throughout the year.At the same time, the temperature will rise with the Y axis. The sea level of the mountains is y = 144.

For rainfall: On the X -axis, the amount of rainfall is more -less -less -less this cycle distribution, and on the Z axis, the overall precipitation overall increases with the increase of the Z value.The precipitation <70 is the desert, 70 ~ 150 dry biological group, 150 ~ 400 is an ordinary biological group, rainfall> 400 is rain forest.

At the time of the world (x = 0 y = 144 z = 0), the temperature is the standard value of the mountains, and the precipitation is 250.

Therefore, we generally recommend building the base on the precipitation of 200 ~ 350, the Z-axis -1000 ~ 3000, flat terrain, and freshwater.This is conducive to the growth of most crops, and the flat terrain is beneficial to the expansion of the later base.

Use fire

First make a fire bow, burn as much charcoal as possible, and burn the kiln at the same time.The firing time of charcoal is 20 minutes, and the firing time of the kiln is 6.6 minutes.

The burning kiln mainly burns a small tank, a chisel, a saw, and the mold and kettle for the ore.

When I ran the picture, I picked up 10 copper grains (native copper, malachite, and bronze ore). Remember to receive the task reward, and there are 100 units of copper.

Each 100 -unit mineral can be made into a tool or a ingot!

The 10 copper grains that are picked up and 1 rich ore received, and the reward for making ore searches, a total of 300 units of copper.It is recommended to make a saw, a chisel and a mine pick.

Mining

As for how to find a mine and how to set up a bracket, the hazelnut cat has written in the mission book very clearly. I won't go into details here.

After finding the ore vein as written in the book, dig it with a hazel.

There are three types of minerals: barren mines (20 units), ordinary ore (50 units) and enrichment mines (100 units)

Regardless of the mines in the early stage, you can dig, and you can depend on the situation in the middle and late stages.

Carbonate rock layers include but are not limited to: limestone, white 垩 rock, carbonate rock, and marble.Can make lime

The phosphate rock layer includes but not limited to: jasper iron rock, flowing rock, shale.Can make phosphorus salt

Silicate rock layers include, but not limited to: silicon rock, granite, quartz rock.Can make glass

Fire Rock Floor, including but not limited to: An Shanyan, Xuanwu Rock.Can make stone anvas

The more common minerals such as copper -iron, zinc, silver, aluminum, aluminum, manganese cobalt, adidit coal sulfur sulfur graphite, etc. are mainly generated in carbonate and phosphate rock layers.

The rare minerals such as tin nickel kaolin stone goldbelie rocks are mainly generated in the illegal rock layer.

Silicate rock formation, I haven't figured it out yet

agriculture

It's time to improve life!

For crops, it is recommended to choose Jimai, potatoes and soybeans

The three correspond to the nutritional grains, vegetables and protein, and the fertilizer corresponds to nitrogen, phosphorus, potassium.

Nitrogen fertilizer is supplemented with nitrogen powder, potassium fertilizer is potassium salt or plant ash, and phosphate fertilizer is phosphorus salt.Why is there no golden garbage

For novice, it is not recommended to breed animals.

After making an iron pot, it is recommended to leave the ice cellar as soon as possible.

forging

This may be the hardest lesson for Qunluan Mengxin!

First of all, you must find the fire rock mentioned above. If you ca n’t find it, dig out underground. There are three rock layers distributed along the Y -axis in each place.

Pin the stone hammer (pay attention to the distinction with the stone sledgehammer) Shift right -click the stone, and make a stew!

When digging the stones, all the six adjacent blocks of the stone's noodles were dug off, and the stone dropped down with the body.

The only role of the stew is welded copper ingot. Each copper ingot is added with a lime powder, and then the stone hammer shift is right -click to weld.

Note that the copper ingots should be heated in the charcoal stove until the word "processed can be welded" before welding.

After making the copper anvil, there is no need for molds.

There is a red pointer and green pointer on the anvil, which heats the material until the word "processable" is displayed, and put it in the anvil.

First target the red pointer and the green pointer, and then hit the pointer to the opposite number of the three numbers above.At this time, according to the order and operation above, make the corresponding beating in turn.

For example, the three numbers above a picking head are +2 +7-15.

Add these three numbers and get -6, so we need to knock +6 after the two pointers.

+6 can be obtained by 3 +2

In the order of the requirements, knock out the steps specified above, that is, first -15, then +7, and finally +2

For another example, thin plates are hit by double ingot (-6), that is, -18 obtained

First target the two pointers, and then make a +16 +18 with one +2 and one +16.

The thin plate is so ready

High -temperature items can be placed in the wooden barrels equipped with water quickly to cool down.

alloy

According to the mineral ratio in Jei, an unknown alloy exceeds this proportion.

For alloys with more than three metals, it is recommended to make alloy calculators.With BUG, the empty -handed left -click alloy calculator will disappear out of thin air.

It is recommended to make a forging iron furnace as soon as possible after making bronze avils, and there is no need to make bronze tools.

Forged iron

Before the forging iron furnace, you can make a pottery smelting furnace to get a thick iron to make an iron pot.(This step is optional)

After the forging iron furnace is made, it becomes a multi -block structure according to the task book.

First place 8 charcoal on the bottom of the forging iron furnace, and then throw 24 charcoal and 24 ore on the forging iron furnace

There are only 24 of ore regardless of all types. It costs 32 charcoal for each refining iron.

Therefore, it is not recommended to excavate barren iron ore.

After 15000Tik's burning, the iron square billet was burned.

First, the cubes of multiple 100 units are made on the anvil, and each 100 units of each 100 units are made into a forged iron ingot.

Use the same method to create an anvil. Congratulations to you, entering the iron era, it has successfully spent the early stage.

Leather

The animal skin obtained when killing animals is soaked in 8000tik in lime water.

Note that there are three sizes of animal skin, and it is recommended to use the medium size.

After the soaking is complete, place the soaking leather on the log. Note that the right -clicking log instead of the original wood pile placed by the right -click.

At this time, scrape it with a knife to get the scraping leather.

Put the scraper leather into 8000tik in the large barrel of freshwater wood, and get soaked leather.

The last step is more complicated. First of all in the iron pot, it is tantamount to the hot air. If you wait for a long time, you will not indicate that you have no particle effect and put it in a piece of logs, and wait for a while. At this time, the water in the pot is obviously obvious.Change the color, indicating that tannin acid is produced.This is to put the soaking leather in the pan, and wait for a moment to remove the leather with a wooden pot spoon.

The hot source of the iron pot is recommended.

With leather, you can make a fan, water bottle and leather metallurgical gloves.

Box and 坩埚

After making the boxes just obtained, there is no need to burn the kiln again, because the temperature of the charcoal stove when pushing the pullbox can rise to the bare.

Pay attention to putting the outlet facing the charcoal stove when placing the box.

If you want to make a large amount of alloy, you need to use it.

Clean -resistant clay needs to be made, and refractory clay requires graphite and kaolin stone.

Graphite and kaolin stone are two very rare minerals, and they need to be patient.

The graphite and kaolin stone of the original Quanluans have no surface ore grains. They can only be explored by the first manuscript of the East. This bag has a lot of convenience.

After making a cricket, put the cricket on the charcoal stove, and heating items in the pupa is much faster than the charcoal stove!

Blast furnace steelmaking

First build a blast furnace according to the appearance of the mission book.

It is recommended to put a charcoal furnace under the blast furnace, and then put a fan box on the side of the pupae and blast furnace.

First throw the iron ore, lime powder and charcoal at the ratio of 1: 1: 1 above the blast furnace, and then throw at least 3 times the charcoal.

After lit the blast furnace cubes with a fire bow and fire stone, at this time, pushing the furnace box against the blast furnace, until the iron ore melted into a raw iron into the cricket.

At this time, lit the charcoal furnace below the 坩埚, keep pushing the tank facing the 坩埚坩埚, and put the number of forging iron with twice the number of raw iron (the raw iron forging iron 1: 1 is high carbon steel, 1: 2 is steel), until the forging iron is melted, and then use it to use it.The ingot mold can be taken out of the steel.

On the eve of the industrial era

First make black steel based on the formula in Jei and extract rubber according to the mission book.

With all this, you can make coke oven, IE blast furnaces and alloy kiln.

Jiao oven can produce charcoal high efficiency, achieve 1: 1 of the original carbon charcoal, and can produce heterohen oil.

IE blast furnaces can quickly make raw iron, and saves charcoal.

The alloy kiln can quickly make alloys in large quantities without forming an unknown alloy due to operating errors.

At this point you can start developing industry.

This tutorial is over ~

more news

MORE +