"How is Iron and Steel Refined" [GT6] Gregtech 6 (Gregtech 6) Minecraft Game

2024-12-10 17:56:37|Myriagame |source：minecraft skins

Steel refining

Gray Daily News Agency

During the five -year plan, a new weak link appeared -insufficient production of steel.

Steel is an important raw material for the power industry and the machinery industry. In order to meet the needs of manufacturing a large number of LV machines, the power industry has been held as "first". The mechanical industry has lived in the "marshal" status.(Omitted later)

The LV machine is mainly composed of galvanized steel, which requires a large amount of steel.In order to refine steel in the early stage, the following facilities need to be prepared:

A steel burning room (manufactured after the first batch of steel)

A ceramic 陶

Some ceramic molds

A temperature sensor

A steam engine with a boiler

A piece of sand/dirt

A wrench

A pliers

If these devices are allowed to be allowed, they can be replaced.But in order to ensure low price, it is made of more basic materials here.

First, check the equipment intact before steelmaking. If you have problems such as dispellation and lack of molds, you need to continue.(The boiler connected by the engine needs to be warm up)

The mold can be placed around the ，. If you do not want to change the mold frequently, you can use the pouring channel to expand, but be careful not to be too far away.

There are many raw materials for steelmaking. It is recommended to use coal fluff+black sand. Coal powder can be obtained from the non -tobacco coal rock layer, and black sand can be digged from the river.

The first step is to throw the ingredients into the cricket. Each pot should be used with 6 coal pouches+14 black sand, and the burning room and the burning room of the engine should be ignited.

The second step is to wait patiently.In the process of waiting, pay attention to the number of temperature sensors at all times.If the material is correct, two temperatures should be decreased when heating. The first time is because the melting of the coal becomes carbon powder, and the second time is because the black sand melts becomes iron water.After the second cooling, walk to a block that can watch the internal position and take the prepared block.

The third step is to place the square in front of the burning room when the temperature reaches ~ 2000K, and take the wrench.If the burning room is not extinguished when the temperature is about to reach the melting point, the burning room is needed immediately.After the burning room is extinguished, observe the interior, wait for the liquid to become red, export through the mold. Be careful not to touch the mold or 坩埚.After exporting, use pliers to take it out.

The fourth step is to dig up the square in front of the burning chamber and extinguish the combustion chamber connected to the engine or continue steelmaking.

Conclusion: Several turns have proved that the "small" policy in the steel industry has played a huge power. Small iron -made ironmaking and steelmaking have become an important part of the Gray steel industry.

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi