RFTOOL dimension 1.16.5 Ambition tutorial RF tool: RFTOOLS DIMENSIONS Minecraft Game

2024-12-10 17:57:32|Myriagame |source：minecraft skins

This tutorial is set by the author to use the CC By-NC-SA protocol.

The lower version of RFTOOL dimension in the high version is relatively different.

First of all, the simplest dimension requires a blank dimension table as shown in the figure

And the following machine (recorder) -

Right -click the machine to open the UI:

Place the blankness card in the number 1;

Number 2 pairs of returned materials that have been set;

Number 3 Fill in the name and add a variety of cards to save;

Number 4 Input dimension names can only be used in English and cannot use other special symbols such as Chinese and spaces.

As the first dimension, you can set the name directly and press the store.

In this way, the instantiated dimension table can be obtained

Take it out and put it in the dimension builder (and supply power in any way).

The waiting progress reaches 100%, and the dimension has been successfully constructed at this time.

It takes at least two machines to go to this dimension: transmitting controller and material transmission.And power supply:

There are two other machines available, they are material aids and target analyzers.The function of the material aid is that if the receiving end is not enough during the transmission, the player will be killed in seconds. The material aid machine can avoid the player from being killed.The role of the target analyzer is to determine whether the energy of the transmitted destination is sufficient to avoid being transmitted to be killed.

The next step is opened to the transmitting controller. The dimension you want to go to is just created by Random1. Click Random1.

Then the stand -alone Dial/Dial Once button (the difference between the two is that the Dial is set to select the transmission target as selected, and the Dial Once is only selected as the goal for the next transmission}

In addition, the button interrupt is disconnected. Check can only be used when a target analyzer, and can detect whether the destination energy is sufficient.

After success, you can see that the material transmitter starts to shine.

At this time, you only need to go up to reach your destination!

There will be a small house picture in the dimension.(Similar to the low version)

Four lost knowledge and various cards can be found inside.(Ordinary, rare, rare, legend)

They need them to create a specified dimension.

At this time, three machines are needed.Research device and dimension card workbench and knowledge holder.

Among them, the knowledge holder needs to be placed on the side of the dimension card (adjacent), and the research device needs to be powered.

Put the lost knowledge into the research device to study and gain some knowledge.100%of the progress is completed.Put him in the knowledge holder.Then open the dimension card workbench, you can unlock the production of various dimensions cards.

As shown in the figure, the knowledge holder:

The figure is the dimension card workbench:

The role of various dimensions is almost the same as the low version.During the production, five types of materials are required to put the mouse on the card you want to make.

For example, we want the world's alloy block world,

You can see that you need a level 4 energy module (legendary energy module), level 4 memory module (legendary memory module), spatial fragments (dimensional fragments) and material absorbers (have absorbed 100%lower boundary alloy block) and have three dimensions:Ordinary rare legend

1 Putting a white card here we need to make the material card and place the white material card;

2 Place the memory module;

3 Place the energy module;

4 Place the absorber;

5 Place the material according to the prompt;

6 Display unlocked cards;

7 Create a card;

8 The card will appear here after success.

You can get a lower -bound alloy block material card without accident.

Put him in the recorder,

An error prompt appears, which means that the geographical card should be placed or modified card behind the block dimension card.

After creation, you can enter the dimension according to the above tutorial!

also!The obtaining monster of the three dimensions of essence drops.Three Slime may be generated in the dimension created by RFTOOL.(Three species of Slim are relatively strong, not easy to fight)

The knowledge of the dimension card and the loss may also fall randomly when killing the last filmmaker!

Dimension monitor.You can see the energy value of this dimension. When the energy is 0, the player will be killed.The creative mode will also get a series of debuff.

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi