your current location：首页 > news>Some simple and practical small mechanical mechanical power (Create) Minecraft Game

Some simple and practical small mechanical mechanical power (Create) Minecraft Game

2024-12-10 17:57:41|Myriagame |source：minecraft skins

Precision component production line

In the survival of mechanical power, windmills are an important source of power in the early stage, but although the stress provided by the windmill is high, the speed is relatively slow. Generally, many large and small gears need to be changed. The speed controller is particularly important. It is particularly important.It can simplify the process of the transmission and is also very beautiful. However, the synthesis of the speed controller requires precision components. Therefore, how to be a fast and low -cost synthetic precision component in the early stage is the focus of this tutorial.

Material

Production line assembly

First dig a 6 × 2 groove, place a 5 -square -length conveyor belt, and finally put a bucket of water (if you do not miss the iron, you can also replace the water into a funnel).

Then dig a pit on the other side of the conveyor belt.

Pay attention to the direction of the waterwheel rotation.

Place 3 chain transmission boxes and 1 cross gear box.

Then place three robots (you can see that stress is completely sufficient).

As shown in the figure, the Anshan Rock loophole and the barrel.

Place wooden barrels, brass vulnerabilities and filters on the other end of the conveyor belt.

The filter is a semi -finished product of the precision component. Choose a blacklist and ignore the attributes of the item (the semi -finished product of the precision component can be equipped with a gold version to get it).

Put small gears, large gears and iron grains in turn to the robot (you can also place funnels above the robot to cache).

Put the gold version into the barrel on the left, and you can get precision components in the barrel on the right after a while (remember to put too much gold version at one time).

High -efficiency brush machine

In some modules, the demand for round stones is very huge, and this stone brush machine can efficiently provide a large amount of stones.This stone brush machine can produce 32 stones at a time, and 9 groups of round stones can be produced in one minute without consuming motivation.

Assemble

The framework is shown in the figure that three barrels of water are required.Place magma to the glass, and a total of 32 barrels are needed to produce stones.

Control system

The control system is shown in the figure. Two phased control rails are placed, and the control rails are activated with a trolley.Place a detector to detect the generation of stones and activate the mine car structure for mining through the pulse extender.

Set the pulse extender to 5T.

Place the mines assembly station on the control rail and set it to rotating locks.

Prepare 32 power drills and 8 Anshan shells as shown in the figure, and use strong adhesion.

Finally, stick a wooden barrel cache stone.Place the assembly mine car on the mines assembly station of the brushing stone machine, and activate it with redstone (remember to remove the lever after activation).

Finally, the stone was exported with a slot.

Cymbal treatment

If sand and gravel are also needed, you can take out the stone in the object insurance library for treatment (it is recommended to set the quantity in the brass funnel to 16).

Place 6 vertical gear boxes as shown in the figure.

Put a crushed wheel on the vertical gear box to get sand and gravel.

If you need to wash or melt, you only need to place a blower below the conveyor belt, and place the filter on the brass funnel or brass tunnel.

4x speed drumry processing

The speed of the batch processing of the wind turmoil is not affected by the speed of the wind turbine, and the number of influence is the number of wind turbine.Therefore, the more the number of wind turbine is used to use a fan for mass processing, but the more the more it means that the larger the volume, the more cost -effective for processing of the 4x tumor.

First, determine the location of the wind turbine, and the glass is the ground.The first group of blowers are shown in the figure.

Then place the iron fence above the burning chamber, and place the second group of blowers and chain gear boxes after an empty block.

Note that the third and fourth groups of wind turbine should be placed in two blocks.Otherwise, the speed of the drums can be blown by 1).

The chain gear box behind is placed.

Connect the four groups of wind turbines according to the method in the figure.

As shown in the figure, the speed is adjusted to 1 or -1 according to the direction of the power source.

Finally, 4 camp fires and 4 soul camp fires, as well as a bucket of water and a barrel of magma (remember to place the square under the camp fire to separate the water from the magma).

The devices of four times the processing of the turmoil are completed.

You can decorate and beautify according to your preferences.

more news

MORE +
Hot news MORE +
Minecraft Skins MORE +