[ROC] RotaryCraft

2024-12-12 09:18:07|Myriagame |source：minecraft skins

Brief introduction

RotaryCraft is a module with a distinctive industrial technology.

As a technology module, it is very similar to many other similar modules, such as BuildCraft, Industrial Cract 2, Thermal Expansion, and so on.

However, this module is significantly different from these modules.

Why is the "rotation process"?Energy transmission and energy system.There are no cables, generators or anything similar; the engine generates rotation power -torque and speed, and the product of the two is the power of the machine.These three form the ternary energy system of this module.The power generated by the engine is passed through a shaft, gear box and other transmission devices, and finally reached the machine.Almost every working machine has the minimum requirements for torque, speed, or power -or both.At a higher speed, the machine runs faster; at higher torque, efficiency is higher.Higher power can also provide better functions.For these more detailed content, you can access the manual in the game.

The module is added with the in -game manual, which is convenient to use and the page is simple.There is a basic introduction to some physical concepts, and it is introduced to almost all game content and even the modification of the module configuration (or display).However, due to various reasons, the simplified Chinese Chinese of this module has disrupted for a long time and may cause the game to collapse.You can go to Endravaritia/Reika_mods_localization (github.com), and refer to the page to add Chinese to the page.It may cause the game to collapse.

Interpretation of basic physical concepts in the manual.

When placing the machine, the prompt of energy input and output can also be displayed with an angle sensor.

Characteristic

-The extremely beautiful model and animation!

Special effects of position transmitter.

This picture shows part of the aviation fuel production line, which produces a long heat wave when the gas turbine is launched.

-The technology under the domination of real physical laws!

-The extensive linkage for other modules!

Module linkage part of the block.The second left is the linkage of the industrial era 2, the second middle is the linkage of thermal expansion, and the first left of the right is the engine of the construction fuel, and the first right is the combination of the linked of the redstone plan and the application energy.

-Che equipment for all aspects of survival!

-The a lot of powerful features provided by the game later!

Extract machine -the most powerful mineral production equipment: less than 5 times, as many as 13 times minerals increase production, as well as by -products as rewards!

Diamond -real mining machine: tunnel mining and unlimited range, high throughput automation mining!

Cover -high -speed, multi -functional automation trees planting: enchanting to increase throughput, range, and more!

Brush Monster Cage Controller -high -speed, controllable monster generators!

Rail gun -very powerful point defense turret and variable damage ammunition

Fricate heater -external heater: original melting furnace, blast furnace of this module, even the soul smelter, the mysterious alchemy furnace, and more -fuel -free and faster work!

Dew point polymer -extremely high -yield water production system!

Pneumatic pump -very high throughput, highly controllable point -to -point items transportation!

Centrifugal machine -high -speed separation and extraction materials, and linkage with forestry!

Make a group photo of nine machines mentioned.There are no power facilities here.

Design concept

lifelike.

The design of rotaryCraft is as realistic as possible.More realistic machine production capacity, energy consumption, and machine function controlled by real physical laws.For example, the thermal machine will cool down according to the thermal pairing law, and the axis can only treat the torque allowed by the shear strength. Various sports processes are modeling, and the impact of the pressure or temperature exceeds the tolerance must be considered.

In addition, in most cases, the formula and production process are imitated formulas and production processes in the real world: for example, HSLA steel, one of the basic materials of RotaryCraft, is a real material. ThereforeFields need to be simulated in accordance with realistic chemical materials.

The power demand of the machine means that a machine rarely drives directly by the engine and achieves good results at the same time; in most cases, the torque and speed distribution of the engine will be greatly not matched withVarious transmission devices, such as gearboxes, change the distribution of two "demand".

One of the most complicated machines is the interface of powerful mineral production equipment.Its four different stages require different energy inputs, and it cannot be automatically drawn in the middle.In the figure, the machine is driven by the most power engine and the power of the gas turbine. However, the speed of the second and third stages is still extremely slow.Players need redstone to accurately control the energy input to make the machine run at high speed.

tool

RotaryCraft provides various tools.Some are just different materials for ordinary tools; however, the "Kiyan" series tools are the most striking.The base rock material is made of dust and steel melting grinded by the base rock.Different degrees are one of them. The main function is their enhancement of the corresponding functions, usually appearing in the form of enchantment.As for the armor, the possibility of players is greatly reduced by "one hit".In fact, these tools are the most popular features in RotaryCraft.Another set of main tools is those energy consumption tools that use roll springs (one type of "battery").These tools include various handheld sensors and weapons.Among them, there is a weapon, a gravel gun, which can cause extremely huge damage (about 5,000 points of blood in the case of full energy, which is criticized and unbalanced).Other tools include various small things with energy, such as forestry branches, night vision mirrors, spring pumps and handheld pistons.That's right, there are a large number of module linkage -such as the screwdriver of the mysterious pole -ended screwdriver!

​

Technology tree design and module self -balance

The design and balance of RotaryCraft are completely different from most other modules; compared to the progress of the progress of the technology tree, the demand for the continuous expansion and the demand for task -type resources (except for encouraging unnecessary time consumption), the design of rotaryCraft designSelect the progress of the technology tree directly -each machine, or the level of technology tree, based on the knowledge and ability of how to control the machine and how to use the machine to achieve the goals.In other words, in the end, players directly determine whether the machine can achieve the purpose, rather than whether the player can synthesize the machine, and then use the machine to achieve the purpose directly.

For example, at some point, after making a certain machine, the function of the machine (or tool) requires another raw material for the production of another machine, and this other machine may have its own raw material demand -that is, that is, that is,, that is,, that is,, that is,, that is,, that is,, that is,, that is,Players need to build a set of industrial processes (such as the production of ethanol and aviation fuel); at other times, more freely, the machine only needs energy transmission that has been mastered by the player before, or it has automated certain resources.

​

The various native engines of the module body are displayed.From right to left, it is arranged in the order of technology trees.At first glance, the synthesis is very cheap, but it is impossible to jump technology trees.

problem

The author has designed many problems for RotaryCraft, which requires players to solve during the play.Most of these problems appear in the balance of energy demand:

The design of the RotaryCraft infrastructure is a problem.It does not simply connect the machine with a pipe to the generator, allows it to store energy like RF, and then release it at work -or, using a generator with sufficient power to match the rated power requirements of the machine;RotaryCraft, like this naive "plug -and -play" machine, will be inefficient and expensive, and even unable to complete the work at all.

​

An extremely inefficient design will only adopt a grinding machine driving method in the early stage.

​

As far as the above picture is concerned, if the torque input value of the grinding machine is lower than its needs, it cannot run at all, and it is not good at providing additional torque.Like the picture above, simply restrict the engine [in the early stage of the ROC, the stack of the engine power stack, that is, in general, only the power of the four engines can be stacked.This requirement — but more, the cost is a waste of power -and a single engine that has undergone appropriate transmission can better meet the needs.Similarly, more engines will not increase the output speed. Instead, it may cause power transmission because of unequal speed, and at this time, the power received by the machine is far less than the sum of the power generated by the engine.This means that simple superposition power may not make the machine operate more efficiently.

In addition, for many power systems, simple solutions may not be efficient, and even as far as the strength of the materials they need is not feasible: as the torque or speed increases, they will "apply" gears and shafts to greater greater "applies" to the gear and shafts.The pressure, which means that you need better and more expensive materials, and may even need materials that you can't produce yet.Therefore, you may need to think creatively how to maximize the efficiency of the machine without exceeding these restrictions.

But the ROC body is powerless for the relatively strange energy distribution.To this end, the author has produced an official affiliated module ElectricRaft to make up for this problem.

This is the interface of the last step of the aviation fuel production line and the distiller.The machine in the figure is directly driven by a gas turbine.This picture perfectly shows many design concepts of ROC and the problems left by the author.Its production process is to simulate realistic materials with the original material.The six grooves on the left are raw materials consumed by probability, which come from soul sand, magma paste, lower world rock, flame powder, coal, and pink dye (aviation fuel is pink).All five materials come from the hot lower boundary, and the difficulty of acquisition also matches the high efficiency of product aviation fuel.The material was mixed with the green ethanol under the catalysis of the tears of evil souls, and eventually changed the production rate with the pressure of pressure, generating aviation fuel.The three grooves on the right represent power, speed, and torque, and the distillers have demand for the three; after the demand is beyond the demand, the machine processing speed is getting faster and faster as the speed increases; as the torque that exceeds demand increases, "" "The pressure "is getting higher and higher, and the yield has gradually increased.Therefore, whether it can balance the distribution of speed and torque in the total power, and the supply of raw materials is suitable, it is important to determine whether aviation fuel has high production efficiency, and even whether the production line that can supply energy with gas turbines (consumed aviation fuel) can work normallyfactor.Common problem

The information provided by FAQ and Encyclopedia on the official website of Reika.

The following "I" refers to Reikakalseki, which is the author of this module.

Q: Why not update 1.10/1.12/1.16/1.20+?

Answer: See Reika's interpretation of version update issues.In general, because the high -version transplants require too much reconstruction, the cost cost required for transplantation is far greater than the benefits, so the update is useless.

Q: Can I turn off the model or animation?They are too serious!

Answer: Models and animations are not the source of Katon.Part of the rendering machine with different degrees is not more difficult than the original.The model can provide a lot of useful information that cannot be obtained in other ways.For example, machine IO and damage, intuitive fluid reserves, operating speed, temperature and faults that are about to occur.Models and animations are part of the attractiveness and uniqueness of RotaryCraft -it can even be considered the basis of module design.

For 90% of the model, the actual number of actual polygon is actually not much, which is usually comparable to several creatures.Only by disabling all renders can it have a big difference -sometimes it does not even.In addition, I don't intend to design 300+ independent textures for each square.No -that is too heavy.Moreover, for most computers, unless you create a huge amount of machines, it will not bring serious stutter.According to the previous tests, in the late game, even if all the game rendering is turned off, the performance is actually not so good -the stuck in the module environment is usually not caused by a single problem.

You can install various types of optimization modules, such as Optifine [may not be stable], Fastcraft [According to tests that may lead to REC neutron failure], Angelica [may unstable], and Reika's own optimized module Archisections to reduce stuttering.

Q: Why are all machines so cheap?They are too destructive to balance!

Answer: As mentioned earlier, the balance of RotaryCraft is self -consistent.It is not equivalent to other technology modules.RotaryCraft does not want to restrict the scientific and technological development of players by increasing the synthetic cost (usually large -scale or expensive materials).On the contrary, RotaryCraft "hierarchically" machines in actual science and technology trees -instead of inserting the "material level" in the middle.Manufacturing -More importantly, running a machine is not a problem that simply puts piles of resources into the brain on the workbench, but to design a reasonable solution that can implement function through the machine, and the supporting facilities of this solution.facility.

Q: Why is the energy conversion with RF so unbalanced?The power provided by the initial engine is too small, and the engine power in the later period is exaggerated!

Answer: The ratio of energy conversion comes from thermal Expansion RF.To be precise, it requires specific energy based on the energy required by the lava furnace melting stone -in reality, in reality, a melting cubic meters of rock requires a specific energy, that is, 5.2 mega Jiao ear.Add a fixed RF consumption in the lava furnace.The two are comprehensively obtained.As for the steep energy conversion curve, this is because the energy input and output of most modules is linearly increased, and RotaryCraft grows.However, if you still feel that the engine power is not large enough, there is indeed an official affiliated module that can provide LP power here: Reactorcraft.It may cause a lot of stuck.

Q: Why not use electricity as energy?The axis power is too complicated!Energy transportation is too troublesome!

Answer: In fact, there is an official affiliated module for the purpose of simple energy transportation, namely ElectricRaft.It adds a series of machines used to simplify energy transportation and use electricity as an energy transmission medium.Please note that these electricity is not similar to the power of other technology modules, but it looks like an equivalent alternative version of the axis power.However, if you want other technology modules, simple energy system -in short, it is never possible.Turning the energy system into electricity is the core of abandoning Rotarycraft.This requirement is similar to that the equivalent exchange is changed from EMC to using a chemical reaction -it symbolizes that it is not interested in the module.As far as I am (Reika), I think this is a considerable insult, similar to saying "your mod is good, but my method is better" [Reika hates others' fingers to draw hands].In addition, there are many modules in MC, and many players think that one more is too much.In addition, Reika is very realistic.-Well, think about it, do you really need electricity?Current circuit, magnetic induction, node analysis and electrical phase calculation?You will definitely abandon your fantasy of "electricity is simple".Q: There are various problems in my module!Crash, black screen, incomplete Chinese, and others!

Answer: Check whether the module is the latest version [given that Reika update may lead to a series of problems, and the old version will be deleted when Reika updates, please reserve the old version of the backup before the update].Check Dragon API installation.Check whether the version of Simplified Chinese [V20 can cause the game to collapse, but there is no problem with traditional Chinese.At least in V33, there is no problem of simplified Chinese.V32 will also collapse due to the update of Chinese documents.This issue may still come again in the future.].Check whether Optifine is installed [at least in V33 without any problems].Check various optimized modules [V12A ~ V23 will conflict with fast process, high-definition repair, and universal font repair conflicts. From V24, it will be compatible with FASTCRAFT -.25, compatible with Unicodefontfixer-1.1.12-MC1.7.10, and some old versions are not compatible with Optifine.].Check whether various API modules are the latest version.Check whether the version number of other REIKA modules is consistent.Check whether the module file is modified.Check whether the module file name has been modified.

In principle, from software (modules, configurations, etc.) to hardware (computer configuration), the closer to the Minecraft of Reika, the less likely it is to encounter the collapse problem.You can refer to the module list of the Reika self -packaged Dragon Realms to increase the module or modify the configuration.For example, the collapse of the V33A's oblique gear crash can be repaired by installing the ChromaticRaft.

After entering the archive, the black screen needs to drag the border or maximize the window.If you stay in place for a long time before moving, the "you are not longer afk." The normal phenomenon of "You are Longer Afk."If you have checked all the content above, the game still collapses, you can try to add Java startup parameters-DFile.encoding = UTF-8.It is necessary to use simplified Chinese, but simplified Chinese can also use this Java parameter.If you still collapse, try to open the MOD/RotaryCraft+1.7.10+****. JAR delete the reika/rotaryCraft/resourcess/zh_cn/categories.xml in the jar file.But at least you can open the game.

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi