[Xwm] XAERO's World Map (XAERO's World Map) Minecraft

2024-12-15 01:07:43|Myriagame |source：minecraft skins

Overview

XAERO's World Map Mod adds a full-screen map for your Minecraft client.It can be used as a separate module, but it is better to use with XAERO's small maps.The reason why it is provided separately is to keep the small map of XAERO as lightweight as much as possible.This module is the main client.Installation on the server can get some additional functions (such as world recognition).

The module is still under development!Please report any loopholes you encounter, otherwise they are likely to be unable to be repaired.You can report the loopholes of the author's report.

Make sure your world is optimized for the Minecraft version you are playing (single game -editing -optimizing the world) (repeat this operation after each Minecraft update).It takes a lot of time to generate single -player game maps in the uniform world archive.

If you encounter difficulties when installing any module, some guidelines may help you.

characteristic

Automatic cache world map (unlike manual paper map).You can create multiple maps on the same server address and manually or automatically switch between them;

It can be used in single -player, multiplayer games and Realms;

Anti -intuitive interface.Press the M (default) key to open the map interface, move the map with the mouse, and use the mouse to roll the wheel and reduce the map, similar to Google Maps.The prompt box on the map interface lists all relevant control, and many controls can be customized;

You can choose to automatically detect multiple worlds on the server;

Display block claims and allies players in Open Parties and Claims module.Let you claim or mandate the block from the map;

Resource package support.Changing the resource package will cause the map of the entire world to re -generate;

Cavedo dimension support (such as lower bounds);

Optional original map mode makes the world map look like the original paper map;

Customize the shadow of the terrain;

"Footprint" can show the path you have recently gone;

If necessary, it can help improve the setting of module performance.But usually, the performance of the module should be very good at default;

XAERO's small map linkage.The small map module will display the block provided by the world map.The world map module will display the path point of the small map module from XAERO.It can also be used with better PVP (Better PVP) module.You can create, edit, and transmit it to the path point without leaving the map interface;

It is used to control the effect of the player on the server/map.When writing this article, there is the following potion effect: xaeroworldMap: no_world_map.These effects default to the neutral type, but you can also add _harmful to specify the harmful type at the end of the effect ID, such as xaeroworldmap: no_world_map_harmful;

Since version 1.14.0, you can open the path menu on the map by clicking the icon in the lower right corner of the map screen.In the path ordering menu, you can see the list of all map path points from the rendering set, interact with them with a mouse cog, and filter them in the text field according to the name.You can also switch the visibility of the disabled path point in the menu, switch all the gathers of all path points, and change the current path point set.The way to hang the path in the menu is just like hanging the road point on the map: the path point will be highlighted on the map, you can use right -click or hang up control to interact with the path point;

Export the map to the option of the PNG image file.The module will try to export the entire map, so if the map is millions of blocks, it may not be exported.The author plans to provide more options for export maps in the future;

By binding it to the items you need or equipped in the shortcut bar, thereby limiting the options of your map access permissions.For example, add MapItemid: MINECRAFT: Compass to any position of the configuration file to bind it to the compass.In this way, unless there is a compass or a compass in your shortcut column, the map will not be able to run.

gallery

Main world

Main world

night

Lower boundary

Common problem

How to restore the lower realm map before the 1.30 update in multiplayer games to display in the "complete" cave mode type?

First of all, exit the server and find the Minecraft game directory you use to play on the server.In the game directory, enter XAEROWORDMAP/MULTIPLAYER_ [Server_address]/DIM-1/[MAP_FOLDER].If the folder does not exist, create a folder called "CAVES", remove the quotes, and then enter the folder.In the CAVES folder, create a folder called "-2147483648". If it does not exist, please remove the quotation marks.Returns the folder containing the "CAVES" folder and move all the ".zip" files to the CAVES/-2147483648 folder.Please delete the cache folder or move it with the ".zip" file.How to set up a cave mode to make it the same as that below the 1.30 version and below the 1.30 version?

This can only be fully realized only when using a normal version of the small map or not using a small map.The fair -competitive version of the small map now disables the world map cave model in the lower world, and cannot be switched, so it will not be exactly the same as before.

If you have the lower realm map data before 1.30, please follow this page "How to restore the lower realm map before the 1.30 update in multiplayer games to display in the" complete 'cave mode type? ".

After completion, add a world/server and open the world map settings.Find "Default Cave Mode Type" and set it to "Guan", and then set the "Legible Cave Maps" to "Kai".Next, open the world map interface and click the cave icon at the bottom left of the screen.In the open menu, set the "top mode Top y" to any number.If you are in the main world, set the "Cave Mode Type" to "Guan".In the lower realm, set the "cave mode type" to "complete".The cave mode type is stored in each dimension, so you can set it to "complete" in any similar mesh dimension, and set it in other dimensions to "off".You can also switch display below the Bedrolk ROOF and above.

Why does the right -click transmission not work for me?

This module will send a chat command to send you to a specific coordinate. By default, it is /TP @S X Y Z, so appropriate permissions are required.The original /TP command requires OP status (cheating has been enabled), but on the non -original server installed with certain plugins, it can also set a separate authority for the command.The command used can be changed in the world map settings. The "Map Teleport Command" is changed.Non -original transmission commands usually do not support @S and other selectors, so it may need to be removed from the configuration command.There is also a option called "Player Teleport Command", and uses when right -clicking the tracked player (such as the gangs in Open PARTIES and Claims).The transmission to the path point is to use its own settings in the small map module.You can learn about the relevant information on the "Small Map description" page under "Frequency".

How to view the map without walking manually?

In a single game, the map is directly loaded from the world.This means that you can use any tool you like to pre -generate the world, log in to and use the "Reload Regions" options in the World Map settings to repair any conflict in the map cache.In multiplayer games, if you can download the server world archive and enter the world in a single game, then you can use the method you choose to preview the world, log in again, and then use the world map settings "ConvertAll Regions) "converts the entire world archive to XAERO-> World-Map-> World-> NULL-> CM $ CONVERTED compatible map examples to copy/move the map instance folder to XAERO/World-Map Folder's server map instance.

Why do the same server address/IP use the same map and cache the same map?

This module allows you to have multiple maps on the same server address.You can switch freely between the maps, or you can create a new map at any time.You can choose the correct "Map Selection" mode according to the server type to prevent the map from being covered.Click the icon in the lower left corner of the world map (if the menu is not opened by default), you can select the map in a special menu.In the menu, you can switch between manual, world spawn and single (Single) mode, and select/create maps through the drop -down menu at the top center.If the mouse hovers on the Map Selection option, you can read all information about each map selection mode, including the server (Server) mode.The World Spawn mode is equivalent to the world map before 1.6.So you can continue to use it without reducing the module.Server mode is the best choice in most cases, because the server automatically controls your map selection according to the server level ID.It requires installation of the module on the server.If your map becomes an empty map after changing the map selection mode, you can re -bind the map by selecting the map you want to use from the drop -down menu.Why does the world map be confirmed?

One server address can have multiple main worlds, lower bounds.This may be caused by multiple sub -servers, or it may be just a number of world archives, such as a "lobby" world and a "game" world.Different worlds do not have any unique ID on the client, so they cannot be reliable.Because of this, the world map module allows you to set multiple world maps for each dimension on the same server address.In the old version, the map selection is manual by default, which means that each time the switching dimension/world/sub -server, you will ask you to confirm which map is used.You can also choose one from 2 automatic modes.Click the icon in the lower left corner of the world map (if the menu is not opened by default), you can select the map in a special menu.In the menu, you can switch between manual, world spawn and single (Single) mode, and select/create maps through the drop -down menu at the top center.If the mouse hovers on the Map Selection option, you can read all information about each map selection mode, including the server (Server) mode.The World Spawn mode is equivalent to the world map before 1.6.So you can continue to use it without reducing the module.Server mode is the best choice in most cases, because the server automatically controls your map selection according to the server level ID.It requires installation of the module on the server.If your map becomes an empty map after changing the map selection mode, you can re -bind the map by selecting the map you want to use from the drop -down menu.

After installing the world map, why can't I see my small map path on the server?

The maps of the map you currently confirmed will affect the point of ideas in the small map module as automatic.This makes each map create a separate path data.At any time, you can enter the road order menu (press the U key), select and check any non -automatic path point world from the drop -down menu in the upper right corner.You can choose options-> to make the world automatic, so that any sub -world in the currently confirmed map is automatically automatically.

Why did Minecraft map "reset" a specific server?

Don't panic.It is almost definitely not deleted (as the author knows, this situation has never happened).The old version of the world map uses a world -based system to divide the server into multiple maps.This system often collapses because the server sends a false world birth coordinates to the game client, so it collapses to add custom functions to the original compass.Make sure to update the module to the latest version.There are many map selection modes to choose from, and the default mode is manual.Now you can view any world map on the current server address.Click the icon in the lower left corner of the world map to open the map to select the menu (if it is not opened by default).The drop -down menu on the middle of the middle allows you to choose the existing or creating new world map.You can hover the mouse on the map selection mode setting (lower left corner) to read the working principle of each mode.Server mode is the best choice in most cases, because the server will control your map selection based on the server -side level ID.It requires a module on the server.Manual mode is the safest choice and can be used on all other servers.If you cannot choose the server mode, there are two other automatic map selection modes.Please read more relevant information in the setting prompt box.

Is the old map not in the map menu?This may mean two situations: the server address has been changed or the dimension ID has been changed.

Let us start with the dimension ID.Each dimension on the server has a separate directory in the game directory-> XAEROWORLDMAP directory.Before performing any operation of the XAEROWORLDMAP directory, back up the directory.In the old version, the name of the dimension directory includes the server address and dimension key, such as xaeroWORLDMAP/Multiplayer_127.0.0.1_dim1.In the new version, the dimension directory is a sub -directory, so it is similar to XAEROWORLDMAP/Multiplayer_127.0.0.1/DIM1.Out of compatibility considerations, the default main world, lower and last dimensions are named NULL, DIM-1, and DIM1, respectively.The name of other dimensions should be based on the original dimension ID, such as Multiplayer_127.0.0.1/Minecraft $ Overworld_Creative.In version 1.16+, you can view the current dimension ID on the F3 screen in the game to determine which directory corresponds to which dimension (such as "Minecraft: Overworld").Edit File/Directory, please exit the game title interface or close the game.Each dimension directory contains the subdirectory, and each map in the dimension has a sub-directory (such as MW $ default or MW-4,0, -4), and a file called Dimension_config.txt, which contains the mapThe actual display name is displayed.You can use this file to help find the specific map directory you want.When moving/copying the map directory between the dimension directory, the directory should be moved between dimensions.You can name it later in the game.The most common situation is to move the map from /null to /minecraft $ overworld_survival.When the 1.16+ version of the server starts to use the unique dimension ID for each sub -world, this function needs to be used.

To change the server address, you must first delete the game directory-> XAEROWORLDMAP all the directory containing the new server address.If you are using the latest module version, there is usually only one such a directory.Before that, backup the entire XAEROWORLDMAP directory.In addition, at least exit the game to the title interface.Then, you must rename the new address of the old server address directory (in XAEROWORLDMAP) and replace only the address part.

If you have any questions, leave a message or comment on the author!

If you can't update the module to 1.6.1 or update version, there is an old version of the explanation here:

Don't panic.It is almost definitely not deleted (as the author knows, this situation has never happened).This is likely that the server plug -in changes the behavior of the original compatriots, and interferes with the "multi -world" detection of the module.In most cases, the compass will point to your bed, not a global birth point.If you sleep on another bed and cause the map to "reset", then sleep again on the right bed will return to normal.

If the map "reset" is because the new plug -in (if you cannot choose to delete the plug -in), then the following is the method of restoring the map (I hope the plug -in will not do it again):

Make sure that Minecraft is not running.

Enter the game directory.

Enter the XAEROWORLDMAP directory.

Find the directory that represents the dimension you accessed on the server.The name of these directory contains the server address.At the end of _null, the main world, _dim-1 is the lower boundary.

Open the main world directory (_null).

You will see multiple directory beginning with MW.

Find the largest size of the file.Copy the file name somewhere to avoid loss.

Now find the latest MW directory (probably the empty, or directly view the creation date).Move this directory to other places.Don't delete it first.

Name the directory name of the directory in step 6 to the backup directory name in step 7.

Open Minecraft to test whether the main world map has been restored.

If not, please exit MINECRAFT and restore the old name of the renamed directory + to restore the backup folder.Read all the steps to ensure that everything you do is correct.

If the main world has been repaired, continue to execute step 11.

Renamed and backup the catalog of the same name as the main world name to be restored.

If you have any questions, please contact the author!

After restoring the map, why didn't my path point restore?

Please read the small map description page "Why no longer show a specific server?" It should cover most of the situation.If there is no help, please contact the author.

You can use this module to make videos.

The author allows to use it in your integration package, but the following conditions must be met:

Only allow the integrated package to make profitability (including adding sponsor links/banners in your integrated package description in your integrated package) through CurseForge or Modrinth, unless the author allows you to make profitability elsewhere.Please make a private message author at any time.The author is usually willing to give you a permission.If the integrated package is released outside the CurseForge and Modrinth, then you must provide users outside CurseForge and Modrint with a link to the official webpage of the author to show the trust of the author.

---

The name/description of the integrated package shall not be confused with the author's module name/description.

If the author has permitted in writing, you can make profitability in addition to CURSEFORGE and Modrinth, then if the author requires you to do this, you must remove the profitability other than CurseForge and Modrinth.

• 

  National Service DNF Dark Ni

• 

  The new screenshot of the be

• 

  The 15th anniversary wallpap

• 

  3DM Xuanyuan Sinicization Gr

• 

  French magazine is the first

• 

  The sneak game "Republic" wi